Freezer temperature regulator, thermostat, control panel, IP65 protection, 220V, 10A

Features:

1. WIDE TEMPERATURE RANGE: The freezer temperature controller has a temperature control range of -40℃ to 50℃ and a temperature measurement range of -50℃ to 99℃.
2. WIDE APPLICATION: The 220V thermostat can be used in high-power equipment, such as incubators, breeders, refrigerators, fermenters, greenhouses, etc.
3. HIGH ACCURACY: The freezer temperature controller has an accuracy of 1℉ to maintain the temperature within the desired range, ensuring precision and reliability.
4. ACCURATE AND EFFICIENT: The dual temperature probe provides accurate measurement, designed for use in kitchen freezers, refrigerators, cooking cabinets, etc.
5. ENERGY SAVING DESIGN: With a power consumption of less than 3W, this temperature controller helps you save on energy costs while maintaining the ideal temperature for your stored goods.

Specifications:

Item Type: Freezer Temperature Controller
Material: ABS
Voltage: 220V
Output Current: 10A
Power Consumption: Sensor Type: NTC, 25℃, 10KΩ Resistance
Front Panel Protection Class: IP65
Operational Storage Environment: -15℃ ~ 65℃, 20% ~ 85% (frost-free)

How to Operation:

1. Temperature Setting: In measurement control mode, press the "▲" or "、" button to set the temperature (shutdown temperature). If no button is pressed for 5 seconds, the set shutdown temperature will be saved and the system will return to measurement control mode. Temperature Control Output Description: Cooling: When the cabinet temperature exceeds the set temperature value (corresponding to SET), plus the control hysteresis (E3), and after the minimum compressor start interval, cooling begins. When the cabinet temperature is below the set temperature value (corresponding to SET), cooling will be disabled. Resetting output settings: Press "▲+T" for more than 5 seconds and the screen will display YES to restore factory settings. 2. Power switch: When the device is powered on, press and hold the "heart" button for 5 seconds to switch it to the off state; the interface will display "OFF". When the device is powered off, press and hold the "heart" button for 5 seconds to switch it back on; the interface will display the measurement control status.

Package List:

Package includes 1 x Freezer Temperature Controller

Note:

Danger 1:Strictly distinguish between sensor cables, power lines, and output relay interfaces to avoid incorrect connections. The supply voltage must not exceed the nominal voltage range of 220 V ± 10%.
Danger 2: Wiring connections must be made with the power off. Warning 1: This device must not be used in environments with water spray or excessive humidity (relative humidity > 90%, condensation may occur).
Warning 2: Do not use at high temperatures, with strong electromagnetic interference, or in highly corrosive environments.
Caution 1: The supply voltage must be consistent with the voltage indicated on the machine and ensure stable supply voltage.Caution 2: To avoid potential interference, it is recommended to maintain a suitable distance between the sensor wires and power lines. Caution 3: When installing the evaporator sensor, the sensor should be placed near the copper pipe, 5 cm from the evaporator inlet, ensuring good contact between the sensor and the copper pipe.