Frequency to Voltage Signal 0-10Khz To 0-10V Converter Module With Isolation

1、This F/V Module Can put 0-10Khz frequency pulse signal into 0-10V Analog voltage signal

2、Can be used to Convert interface between PLC and frequency, Or movement control card and converter interface matching control occasions.

3、Input pulse level is 3.3v, 5V, 24V. There are jump pin on the board for selection, without any resistance.

4、Power input has anti- reverse connect function, safe to use

5、Output voltage can be minute adjustment, can adjust the Potentiometer to calibration the frequency and voltage Linear relationship

Features:

This F/V Module Can put 0-10Khz frequency pulse signal into 0-10V Analog voltage signal

Can be used to Convert interface between PLC and frequency, Or movement control card and converter interface matching control occasions.

Input pulse level is 3.3v, 5V, 24V. There are jump pin on the board for selection, without any resistance.

Power input has anti- reverse connect function, safe to use

Output voltage can be minute adjustment, can adjust the Potentiometer to calibration the frequency and voltage Linear relationship

lf matched with the encoder, the encoder constant speed continues to turn more than 0.5 seconds.

lf you need matched with PLC, support of NPN. It must be ground.

Signal input with optical coupling isolation, to ensure anti-jamming capability.

Frequency - to - voltage module, response time is about 0.3-0.5 seconds.

Specifications:

power supply: 12-30VDC

Input frequency: 0-10Khz

Output voltage: 0-10V / 0-5VDC

Response time: 0.3-0.5 seconds

Output current: 5MA

Weight: 18g

Wiring:

Package includes:

1 xFrequency to Voltage Converter