Fuel gas can vent simple operation leak leak plugs

Features:

1. [Good quality materials] The general air tank exhaust cover is made of high quality stainless steel and high quality rubber, rust resistant and durable
2. [Leak-proof design] The air tank replacement exhaust cover adopts the design of screw cover and double rubber sealing ring to ensure tightness
3. [Exhaust Cover] The fuel tank exhaust cover can be used for various 3 gallon or 5 gallon gas tanks or other plastic gas or water tanks. It provides an exhaust port for fuel or water to flow out quickly and smoothly
4. [Simple Operation] Provides detailed operation instructions.After drilling the valve stem and rubber seal ring on the tank, simply install it on the tank with steel wire, then screw on the dust cover
5. [Operation Suggestions] It is better to drill a hole in the top and back of the jar to avoid the handle because it is thicker

Specifications:

Item type: fuel gas can vent plugs
Material: stainless steel, rubber
Vent valve: 6pcs
dapper pimper: 1 x front drill bit, 1 x front drill bit reverse drilling
Open key installation: 1PCS
Iron wire: 1pcs
Process: anti-static and leakage design

How to use:

1. DRILL a high hole and the back of the fuel can 2.lay the wire through the drilled hole and out of the spout and place the valve stem With a rubber sealing ring on the wire 3. Bend the wire slightly to prevent it from slipping out of the wire and the wire and valve through the small hole 4. Slide the second rubber sealing ring over the wire and onto the valve stem and remove the wire from the valve stem 5.Put the steel ring and nut onto the rod and tighten with a wrench 6.Partin on the sticker and screw the finishing dust caps

Package List:

2 x Drill Bit

1 x Iron Wire

6 x Air Valve

1 x Plastic Box

1 x Wrench