Fuel injector tester, fuel injector testing and cleaning kit with 4 adapters, four pulse signal output modes, automotive fuel injector testing tool, white

General Description: The combined injector testing and cleaning tool (designed exclusively for gasoline engines, not suitable for diesel engines) is a versatile and practical piece of equipment. It helps diagnose injector problems and allows for individual testing of injectors to confirm blockage, leakage, or incomplete combustion. It can test two injectors simultaneously. Featuring four pulse signal output modes, the user can choose the one that best suits their needs. It uses a 12V power supply (e.g., from a car battery) and can operate continuously. It can identify injector quality when the engine is off, and the mode lock function ensures consistency during injector testing. This tool can be used with any fuel pressure tester for more comprehensive analysis. It offers optional pulse modes: short, long, medium, and extra-long, with switching capabilities. The output cables are made of copper, offering good high and low temperature characteristics. Features: Injector Diagnostics and Testing: Helps diagnose injector problems and tests injectors one by one or simultaneously (two injectors). Pulse Signal Modes: Four pulse signal output modes, optional pulse modes (short, long, medium, extra long). Power Supply and Battery Life: Operates on a 12V power supply (car battery), capable of continuous operation. Quality Identification: Can identify injector quality when the engine is off. Mode Lock Function: Ensures consistency when testing injectors. Combination Use: Can be used with any fuel pressure tester. Copper Cables: Copper output cables with good characteristics of Temperature. Specifications Material: ABS Colors: White Input Voltage: 12V Operating Conditions: Temperature: 0°C - 40°C, Relative Humidity: ≤80% Storage Conditions: Temperature: -20°C - 50°C, Relative Humidity: ≤85% Packing List 1 * Fuel Injector Tester (with power cable) 1 * Storage Bag 1 * User Manual (English, German, French, Italian, Spanish, Japanese) 4 * Accessories 2 * Sealing Rings 1 * Teflon Tape Usage Preparation: Check that the tool is in good condition and that the accessories are complete. Choose the color (orange or white) according to preference. Power supply: Connect the tool to a 12V power source (e.g., a car battery). Mode selection: Choose the pulse signal mode (from the four modes) or the optional pulse mode (short, long, medium, extra long) according to the test requirements. Injector test: Connect the injectors to the tool and start the test. For a more comprehensive analysis, use in combination with a fuel pressure tester. Shutdown and storage: Once the test is complete, disconnect the power supply, store the tool and accessories in the provided storage bag. Instructions: Compatibility: Use only for gasoline engines; Do not use for diesel engines. Power supply: Ensure the input voltage is 12V to avoid damage to the tool. Environmental conditions: Observe the temperature and humidity ranges for tool operation and storage. Combined use: When using with a fuel pressure tester, follow the tester's instructions. Cleaning and maintenance: Clean the tool after use and regularly check the condition of the cables and seals.