Fully Automatic Electric Antenna, Car Replacement FM AM Radio Antenna Mounting Kit for Car Fender Replacement -

Operating voltage: DC12V

Voltage range: DC10V-14V

Operating current: 0.7 ± 0.2 A

Wiring connection method (three): the red wire is connected to the positive pole of the power supply, the black wire is connected to the ground with the ear, and the green wire has two connection methods: one is to directly connect the positive pole of power supply, so that the antenna goes up and down with power on and off, and the other is to connect it separately. Control line, so that the antenna can be controlled up and down at any time.

Extension length: 750 (apart from car length) Protective bottom plate: 305 mm Cable length:

1400mm Voltage: 12VDC

Stainless steel antenna mast, five sections, good AM/FM reception performance, working current less than

0.5A

Noise is less than 50dB, lifespan is over 50,000 cycles, maximum force is over 4kg, and poly Good waterproof performance, easy to install, multiple mounting heads optional Built-in imported micro-relay, 3C-2V coaxial cable, cable length is customizable. Fully automatic antenna for economical cars Five-section stainless steel mast The mast is 39 inches long Good FM radio Low noise, good waterproofing Easy to install High-quality external micro-relay, long lifespan life 3C-2V coaxial cable, 75 ohm impedance Installation angle: 0-30 degrees Number of pieces supplied: 1lucky to meet