G3/4'' 6-point Turbine Flowmeter Indicator Sensor Gauge Male Thread 1-60l/min

General description

The CREA G3/4'' water flow sensor is a practical and compact flow indicator, designed to offer high accuracy and rapid response. It is made from high quality materials, ensuring its durability and resistance to wear. This sensor is ideal for applications such as landscape irrigation, plant watering and traffic control in urban areas.

Technical specifications

Interface: 6-point (G3/4) Inner diameter: 16mm Outer diameter: 26mm Thread length: 17mm Operating power supply: DC5-18V Water flow range: 2-60 L/min ± 5% Pulse output ratio: 50 ± 10% Size: approximately 3.8 x 6.6 cm

Installation

Install a filter screen at the sensor inlet to prevent the entry of particles and debris. The sensor must be installed inside the equipment, protected from bad weather and prolonged humidity.Avoid environments subject to vibration or shock to maintain measurement accuracy. Do not expose the sensor to nearby magnetic materials, as this may alter its characteristics. Do not disassemble the sensor without authorization to avoid damage to the device.

Usage

The CREA water flow sensor is designed to measure water flow in various applications including irrigation and water control. It is essential to respect the conditions of use to ensure optimal operation.

Other information

Do not subject the sensor to severe impacts or corrosive chemicals. The temperature of the medium should not exceed 120 degrees. Wiring mode: red + black - yellow signal output, NPN signal.