Garage Door Duplicator Remote Control 868MHz, 100% Compatible with Hörmann Blue Button Hs1 Hs2 Hs4 Hsm2 Hsm4 Hse2 Hsz1 Hsz2 Hsp4 Hsp4-C Hsd2-A Hsd2-C, 2 pieces

General Description: This set of two Hörmann 868 MHz duplicators is designed to easily replace or duplicate your Hörmann garage door openers operating at 868 MHz. Compact and lightweight, these remotes replicate the secure code of the original transmitter (even long fixed codes) and offer four programmable buttons to control multiple functions. They feature a sliding cover to prevent accidental activation and use the same security encryption as the originals, offering both range and reliability.

Important: It is essential to check the 868 MHz frequency and the compatibility of the listed models — frequency incompatibility = unusable. Technical Specifications Model: Hörmann 868 MHz duplicator (pack of 2) Frequency: 868 MHz (tolerance ± manufacturer's information) — it is essential to check the receiver frequency. Number of buttons: 4 (programmable) Power supply: button cell battery (depending on model) Transmission power: conforms to standards (range approximately 10–50 m depending on environment) Housing: robust ABS plastic, sliding protective cover Weight: very light (keychain size) Operating temperature: standard commercial temperature Security: encryption identical to the listed Hörmann remote controls (not BiSecur) Compatibility and accessories Compatible with 868 MHz (non-exhaustive list): Hörmann HS1, HS2, HS4, HSM2, HSM4, HSZ1, HSZ2, HSP4, HSP4-C, HSD2-A, HSD2-C, HSE2. Incompatible: BiSecur transmitters and any remote control on other bands (e.g., 433 MHz, 315 MHz). Sold as a set of 2 remote controls; batteries not included unless otherwise stated. Accessories: cloning instruction manual included. Use: These duplicators are clonable remote controls—they are not pre-paired. They must be cloned from a genuine, working Hörmann remote control. They are ideal as a backup, replacement, or key fob remote control. To ensure proper operation, make sure the original remote control is functioning correctly and transmitting on 868 MHz. Programming Procedure (Code Copying) — Practical Summary Step 1 — Reset the remote control (optional, to clear the memory): Press and hold button A (lock) and button B (unlock) simultaneously until the red LED flashes 3 times. Press and hold A, release B, then press B three times in succession until the LED flashes. → Memory cleared. Step 2 — Copy the original remote control: Place the original remote control facing the new one (a few centimeters apart). Press and hold the button on the original remote control you wish to copy (e.g., unlock). While holding the button, press button A (or the chosen button) on the new remote control until the LED flashes several times. Release all buttons — the code is transmitted. Test the cloned remote control on the receiver at a short distance; Repeat if necessary. Important notes: Copying requires proximity to the receiver/original; if repeated failures occur, check the frequency printed on the original transmitter (it should be 868 MHz). If the original remote control is damaged, copying may fail. Only use these duplicators for devices that you own or for which you have permission. Unauthorized copying may be illegal.