Garage door remote control (434.92 MHz), 1 piece, compatible with Novotron 502 MAX43-2 and 512 MIX43-2, 2 channels, blue

Compatibility – The garage door remote is compatible with MCHS43-2, MTR43-2, MNHS433-02, NOVOTRON 502 MAX43-2, 512 MIX 43-2, MINI-NOVOTRON 522, 524, MINI-NOVOTRON 522 Design and 524 Design. 2 Channels – The garage door remote has 2 channels operating at 433.92 MHz for efficient control of the door opener. User Manual – The garage door remote comes with a user manual for quick and easy programming and troubleshooting. Batteries Included – The remote comes with CR2032 lithium batteries, ready for immediate use. Not an Original Part – The garage door remote is not an original part. If you have any questions, please contact us. We will respond within 24 hours. Compatibility – The garage door remote is compatible with MCHS43-2, MTR43-2, MNHS433-02, NOVOTRON 502 MAX43-2, 512 MIX 43-2, MINI-NOVOTRON 522, 524, MINI-NOVOTRON 522 Design, and 524 Design. 2 Channels – The garage door remote has 2 channels operating at 433.92 MHz for efficient control of the door opener. User Manual – The garage door remote comes with a user manual for quick and easy programming and troubleshooting. Batteries Included – The remote comes with CR2032 lithium batteries, ready for immediate use. Note: This garage door remote is not an original product. If you have any questions, please contact us. We will respond within 24 hours. ;;;

Description

• Programming type: Programming via the receiver.
• Frequency: 433.42 MHz
• Code: Rotation code
• Keys: 2
• Battery: One battery (12 V DC 27 A / CR2032) is included.

• Access to the receiver is required. Before purchasing, please ensure you have access to the receiver/opening.
  

  100% compatible with:

  MCHS43-2

  MTR43-2

  MNHS433-02

  MNHS433-04

  NOVOTRON 502 MAX43-2

  NOVOTRON 504 MAX43-4

  NOVOTRON 512 MIX 43-2

  MINI-NOVOTRON 504

  MINI-NOVOTRON 522

  MINI-NOVOTRON 524

  MINI-NOVOTRON 522 Design

  MINI-NOVOTRON 524 Design

  Access to the receiver is required. Make sure you have access to the receiver/opener before purchasing. How is it programmed? 1. Open the receiver housing. It is located next to the motor. 2. Briefly press the programming button (ENR, MEMO, PROG, REC, depending on the model) on the receiver's circuit board. 3. Press and hold a button on the new remote control for 1 second. 4. Release the button. The receiver's indicator light will turn off immediately or within 10 seconds, depending on the model.