1/5

Garage door remote control – 868 MHz – 4 channels – For Hörmann hand transmitters – Compatible with Hörmann HSM4, HSE2, HS1, HS4 and HSZ1

Product information

Description

Compatibility: Our replacement garage door openers are compatible with the following remote controls: HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, HSD2-868-BS, HSS4-868-BS, HSP4-868-BS, HSD2-868-BS, HSS4-868-BS. Meet your diverse needs. Whether you want to control multiple garage doors individually or configure different functions for the same garage door – anything is possible. The opener has 4 channels, operates at a frequency of 868 MHz, has a blue LED indicator, and is not compatible with remote controls of other frequencies, even if they look identical. Two programming methods are available: copying the code from the original remote control or programming via the receiver. Note: Integrated scrolling text code (blue LED)! Not available if the original remote uses fixed codes (red LED). Important note: This is a replacement garage door opener remote, not an original remote. Do not purchase this product if your original remote is not listed, even if it operates at 868 MHz. Compatibility: Our replacement garage door openers are compatible with the following remotes: HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, HSD2-868-BS, HSS4-868-BS, HSP4-868-BS, HSD2-868-BS, HSS4-868-BS. Meets your diverse needs. Whether you want to control multiple garage doors individually or configure different functions for the same garage door – everything is possible according to your wishes. It has 4 channels, a frequency of 868 MHz, a blue LED indicator, and is not compatible with remote controls of other frequencies, even if they look identical. Two programming methods: copying the code from the original remote or programming via the receiver. Note: Integrated scroll code (blue LED)! Not available if the original remote uses fixed codes (red LED). Important note: This is a replacement garage door remote, not an original remote. Do not purchase this product if your original remote is not listed, even if it operates at 868 MHz.

Description:

1. Material: Metal and ABS.

2. Buttons: 4 buttons.

3. Frequency: 868 MHz.

4. Battery: Battery included (CR2032).

5. Range: 30–50 m (outdoors).

6. Direct cloning. 100% compatible models:

For HS1-868-BS

For HS4-868-BS

For HS5-868-BS

For HSE1-868-BS

For HSE2-868-BS

For HSE4-868-BS

For HSP4-868-BS

For HSD2-868-BS

For HSS4-868 PROGRAMMING METHODS FOR ROLLING CODE

Copy code from original remote:

Note: Rolling code is factory set (blue LED). If your original remote uses a fixed code (red LED), this will not work.

1. Press and hold the button on the new remote control that you want to program with the code from the original remote. Then press any other button three times until the LED lights up red. 1. Release all buttons. 2. Place the original remote control as close as possible to the left or right of the new remote control. 3. Press and hold the button on the original remote control for 13 seconds until the LED flashes red and blue alternately. The learning process is complete when the LED on the new remote control flashes blue rapidly. Release all buttons. 4. The new remote control is now programmed. 5. Repeat the process for the other buttons. Note: You have 15 seconds to transfer the code. The process must be repeated if the radio code is not successfully transferred within this time. Programming with the receiver: If the original remote control has been lost, the new remote control can be programmed directly with the receiver. 1. Locate the "Learn" or "Program" button on the receiver, press it, and the indicator light will start flashing. 2. While the indicator light is flashing, press the button on the new remote control until the indicator light on the receiver flashes rapidly. This indicates that the new remote control has been successfully programmed.

Features

Brand
CATHERINE
Colour
Black
NF certification
NF138
Height
50 mm
Width
50 mm

You are here:

Garage door remote control – 868 MHz – 4 channels – For Hörmann hand transmitters – Compatible with Hörmann HSM4, HSE2, HS1, HS4 and HSZ1

You may also like

Compare with similar items

Product information

Description

Features