Garage door remote control 868.3 MHz – Compatible with Hörmann HSM4/HSE2/HS1/HS4/HSZ1/HSZ2 – 2-piece hand transmitter

This garage door remote control is a spare part and not an accessory. Please check compatibility with your device using the following list before purchasing.
Compatible only with the following blue 868 MHz hand transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS, compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery, RollMatic, aMatic Red, VersaMatic, LineaMatic
Mini Bisecur BS 4-button hand transmitter with protective metal cover to prevent accidental button presses. It is so small that it can easily be attached to a keyring, purse, or backpack, making it easy to carry. This is a replacement part for the garage door opener, not an original part. Important note: If your original remote is not listed, please do not purchase this part, even if it is an 868 MHz remote. Two programming methods: Copy the code from your existing remote or program it using the receiver. Note: It has built-in rolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), this part will not work. This garage door opener is a replacement part, not an accessory. Please check device compatibility using the following list before purchasing. Compatible only with the following blue 868 MHz hand-held transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery, RollMatic, aMatic Red, VersaMatic, LineaMatic. This portable Bisecur BS 4-button mini transmitter features a metal protective cap to prevent accidental button presses. Its small size makes it easy to attach to a keyring, purse, or backpack. This is a replacement part for the garage door opener, not an original part. Important note: If your original remote control is not listed, please do not purchase this remote, even if it uses 868 MHz. Two programming methods: Copying the remote control code / Programming via the receiver. Note: Integrated rolling codes (blue LED)! If your original remote uses fixed codes (red LED), this remote is not compatible. 868 MHz replacement remote for garage doors, compatible with remotes HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, and HSP4-868-BS. Compatible models: HS1-868-BS, HS4-868-BS, HS5-868-BS, HSE1-868-BS, HSE2-868-BS, HSE4-868-BS, HSP4-868-BS, and HSD2-868-BS. Note: Integrated rolling codes (blue LED)! If your original remote uses fixed codes (red LED), this remote will not work. Programming? 1) Press and hold the button on the new remote whose code you want to copy from the old remote. Press and hold another button three times until the red LED lights up for 10 seconds. Then release all buttons. 2) Place the old remote as close as possible to the left of the new remote. 3) Press the button on the old remote. Copy the code until the LED flashes red and blue alternately. Check if the LED on the new remote flashes blue. If not, move as close as possible to the old remote. 4) Once the blue LED on the new remote flashes rapidly, the learning process is complete. Release all buttons. 5) Repeat the process for the remaining buttons. Resetting: Assign a new radio code to each button on the remote. To do this: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote control. (3) Reinsert the battery. The LED will blink slowly blue for 4 seconds. The LED will blink quickly blue for 2 seconds. Then the LED will glow solid blue. (4) When you release the button on the remote control, all radio codes will be reassigned. Note: If you release the button on the remote control too soon, no new radio codes will be assigned.