Garage door remote control (868.3 MHz) – Compatible with HSM4, HSE2, HS1, HS4, HSZ1, HSZ2 – Black, 4 buttons, 1 piece

This garage door remote control is a replacement part rather than an original accessory. We recommend checking compatibility using the following list before purchasing.
Compatible only with the following blue 868 MHz hand transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery RollMatic, RollMatic, VersaMatic, LineaMatic.
Bisecur BS 4-button mini hand transmitter – with a protective metal cover to prevent accidental button presses. It is small enough to be attached to a keyring, purse, or backpack, making it easy to carry. This is a replacement remote for your garage door opener; it is not the original remote. Important note: If your original remote is not listed, do not purchase this remote, even if it supports 868 MHz. Two programming methods: Copy the code from your original remote / Program via the receiver. Note: Built-in rolling codes (blue LED)! If your original remote uses fixed codes (red LED), this remote will not work. 1. Locate the "Learn" or "Program" button on the receiver, press it, and the display will begin to flash. While the display is flashing, press the button on the new remote. Repeat this until the receiver's display is flashing rapidly. This indicates that the new remote control has been successfully programmed.
Copying: Press the "NEW" button on the remote control where you want to save the code from the original remote. Hold the button down and press any other button three times until the LED lights up red. Then release all buttons. 2. Place the original remote control as close as possible to the left or right of the new remote control. The button on the original remote control should be located approximately [missing information]. Hold the button down for 13 seconds until the indicator light flashes red and blue. The learning process is complete. Once the LED on the new remote control flashes blue rapidly, release all buttons. 4. The new remote control is programmed.
Customer Service: If you have any questions about its use, you can contact us at any time within 24 hours. We will respond. This garage door remote control is a replacement rather than an original accessory. We recommend that you check the compatibility list below before purchasing. Compatible only with the following blue 868 MHz hand-held transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery RollMatic, Ro.taMatic, VersaMatic, LineaMatic. Bisecur BS 4-button mini hand-held transmitter – with a protective metal cap to prevent accidental activation. Its compact size makes it easy to attach to a keyring, handbag, or backpack. This is a replacement garage door opener, not an original part. Important note: If your original remote control is not listed, please do not purchase this remote, even if it supports 868 MHz. Two programming methods: Copy the code from the original remote control or program it via the receiver. Note: Integrated rolling codes (blue LEDs)! This remote control is not compatible with fixed codes (red LEDs). 1. Locate the "Learn" or "Program" button on the receiver and press it. The indicator will start flashing. While the indicator is flashing, press the button on the new remote control. Until the receiver's indicator flashes rapidly, signaling that the new remote control has been successfully programmed.

868 MHz Garage Door Opener – Compatible with the hand-held transmitters HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS and HSP4-868-BS
Compatible Models:
HS1-868-BS,
HS4-868-BS,
HS5-868-BS,
HSE1-868-BS,
HSE2-868-BS,
HSE4-868-BS,
HSP4-868-BS,
HSD2-868-BS.
For HSS4-868-BS
Note: Integrated rolling codes (blue LED)! If your original remote uses fixed codes (red LEDs), it won't work. Here's how to program it: 1) Press and hold the button on the new remote whose code you want to copy from the original. While holding the button down, press another button three times until the red LED lights up for 10 seconds. Then release all buttons. 2) Place the original remote as close as possible to the left of the new remote. 3) Press the button on the original remote. Copy the code until the LED flashes red and blue alternately. Check if the LED on the new remote flashes blue. If not, try moving it as close as possible to the original remote. 4) When the blue LED on the new remote flashes rapidly, programming is complete. Release all buttons. 5) Repeat the process for the remaining buttons. Resetting: Each button on the remote will be assigned a new radio code. To do this: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote control. (3) Reinsert the battery. The LED will blink slowly blue for 4 seconds. The LED will blink quickly blue for 2 seconds. The LED will then glow solid blue. (4) When you release the button on the remote control, all radio codes will be reassigned. Note: If you release the button on the remote control too soon, no new radio codes will be assigned.