Garden fertilizer injector, multi-purpose water dosing pump for the livestock industry

Features: 1. Energy saving: Using pressure flow as electricity, water pressure loss is minimal and no other electrical installation is required, enabling rapid medication dispensing and significant energy savings in emergencies. 2. Unique design: Incorporates alternative dynamic sealing technology for greater accuracy and a unique cylinder and piston movement area design to ensure more uniform and efficient mixing of liquids and medications. 3. Widely used: Suitable for livestock farming, fertilizer irrigation, equipment maintenance, horticulture and floriculture, environmental protection and water treatment, industrial hygiene, vehicle cleaning, food processing, etc. 4. Plastic shell and corrosion-resistant body: The outer shell is made of high-quality plastic, which is wear-resistant, UV-resistant, and does not age easily. The pump body adopts an anti-corrosion design to ensure solution availability and increase service life. 5. Precise and flexible: The precise automatic dosing ratio is unaffected by fluctuations in water pressure. The amount of solution injected is proportional to the amount of water flowing through the pipeline, and external adjustment is flexible and convenient. Specifications: Item Type: Garden Fertilizer Injector Material: Plastic, Rubber Application: Automatic dosing reproduction Ratio Range: 0.4%-4% (1:25-1:250) Flow Rate Range: 20-2500L/H Water Inlet and Outlet Size: 32mm/1.3in, 25mm/1.0in Water Flow Temperature: 4-30°C Livestock Industry: Fixed ratio dosing for livestock and poultry health care for chickens, ducks, cattle, pigs, etc. 2.) Horticultural industry: fertilization, storage, pest control of flowers, fruits, and vegetables, etc. Dilution ratio 5.) Car wash, printing, hospital, wine industry, and other industries, etc. How to use: 1. Choose the location: the inlet and outlet of the proportional pump must align with the inlet and outlet of the main pipe. 2. The proportional pump must be installed as follows: proportional pump at the top and liquid suction line at the bottom. 3. Mount the proportional pump to the wall or other fixtures. 4. Install the inlet and outlet of the proportional pump in accordance with the direction of water flow to ensure a tight seal. 5. Install a 100-120 mesh filter between the water valve and the inlet of the proportional pump. 6. Close the side valve of the proportional pump when adding medication and open the valves on both sides of the proportional pump to add medication. 7. When the pump starts working, you will hear a clicking sound. Then, press the bleed valve at the top of the proportional pump and release it when a little water flows out to ensure the proper functioning of the dosing device. Package list: 1 x xgarden fertilizer injector, 3 x gaskets, 1 x large retaining ring, 1 x small retaining ring, 1 x card holder, 1 x hose (with strainer), 1 x round wrench, 1 x instruction manual. Note: Do not inject corrosive liquids, such as bleach, certain fertilizers, etc., as this may corrode the pump.