1/4
Gas Detector Alarm Portable Gas Tester for Factories Garages ALARMGAS DETECTORGAS TESTERPPORTABLE GAS DETECTION Tester.
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
Specifications: Item Type: Gas Detector Material: ABS Gas Detection: Gas Sensitivity: 50 PPM ALARM MODE (Methane): Sound and Light Alarm Response Time: Battery: Continuous Time 3x1.5V AA (shipped without batteries) Warm-up Time: 20 seconds Continuous Time: 0-90% Application: Suitable for various scenarios, factories, and garages, voltage settings. Operating Instructions: 1. Turn off the device and rotate the sensitivity knob counterclockwise. 2. In a clean environment, slide the switch to ON to turn on the device; the power indicator will illuminate. If the power indicator is steady, the battery is fully charged, ensuring accurate detection. 3. Automatic preheating occurs within 20 seconds of startup; you will hear a ticking sound. 4. Adjust the sensitivity control until the first indicator lights up. 5. Place the sensor near the known source, and the size indicator will increase by clicking. These steps ensure the equipment is functioning correctly and is ready for use. If the battery is fully charged, but the sensor remains unresponsive when placed near the known leak, do not use the instrument; please take it to a repair shop. 6. As the speed increases, the size indicator lights up from bottom to top, indicating a higher concentration. 7. Search the general area. When a detectable compound enters the sensor, the ticking will accelerate. 8. If you are searching for a specific source, reduce the sensitivity.
Features
- BrandTEHTUY
- Length10 mm
- Width10 mm
- Height10 mm
- Weight100 g
You are here:
'/%3E%3C/svg%3E){kind=small}