Gas detector with alarm and LED display, capable of detecting combustible gases.

[Protecting Your Safety] – This gas detector is primarily used to detect natural gas (and town gas). In the event of a combustible gas leak exceeding the permitted threshold, the detector emits an 85-decibel audible alarm, the volume of which can be continuous, progressive, accelerated, or rapid.

[LED Digital Display and Audible Alarm] – Under normal conditions, the gas detector's indicator light displays 0. In the event of a combustible gas leak, the display can show the numbers 1 through 9 and the letter "A". As soon as the concentration exceeds 3% of the LEL (Lower Explosive Limit), the audible alarm sounds and a red indicator light flashes. The alarm status varies depending on the combustible gas concentration.

[Durable and Energy-Efficient] – Equipped with a standard European plug, this detector is ready to use without an adapter, and its installation is extremely simple.

Mold and corrosion resistant, it is made of flame-retardant ABS plastic and is easy to clean. Its power consumption is less than 2 watts, resulting in significant energy savings. It is widely used in restaurants, kitchens, hospitals, hotels, oil refineries, garages, gas stations, and other locations. When the concentration reaches the standard value, the device will sound an alarm until the gas concentration in the environment falls below the alarm threshold. Note: The system requires a warm-up time of approximately 2 to 3 minutes. During this time, the gas detection function is unavailable.