Gasea 6mm Flexible Shaft Rotary Tool with 0.5-6.5mm Chuck Key Electric Grinder Soft Flex Shaft Extension and Handle Compatible

Specifications: Chuck size: 0.5-6.5mm Handle material: Stainless steel Handle diameter: 26mm/1" Grip length: 14.8cm Shaft length: approx. 89cm / 35.04" Shaft diameter: approx. 0.9cm / 0.37" Bi diameter: 6mm Total length: 110cm This flexible shaft is an extension for electric grinders and angle drills. Connect it to rotary tools, making work convenient and portable. When coupled with the shaft, it offers greater flexibility and allows for grinding in small areas of a workpiece. Comes with a 0.5 to 6.5mm chuck; the greater bend allows you to reach even the most inaccessible places with your power tool. Easy to install and disassemble and can to fit directly into the chuck of the cordless or electric drill. It can be used with polishing kits, drill bits, wire brushes, milling cutters, blade grinding wheels, mounted stones, and grinding wheels. Friendly Note: If you use the shaft with a power drill, it will run at between 3000 and 4000 RPM; If you use it with a grinder, it will run at approximately 10000 RPM. Be sure to rotate it clockwise, let it run naturally, and don't bend it excessively (it is generally not recommended to exceed 45°). degrees) Contents: 1 x Flexible Shaft Set