Generic Car Software Diagnostic Tools, ECU Reprogramming Support for Fast Reprogramming for Car Diagnostic Tools in ELM327 Mode USB 2.0 Connection.

1. Function: Supports most J2534-compatible software, most ELM327 software, ECU reprogramming in J2534 mode with programming voltage, and provides software for diagnosing J1979-compatible vehicles. 2. Detailed Introduction: VNCI (Vehicle Network Communication Interface) is a device that operates between diagnostic software and the vehicle. It is compatible with J2534 Passthru and ELM327. ​​3. Supported Protocols: VNCI J2534 for Nano protocol configuration includes ISO15765, ISO9141, ISO14230, J1850 PWM (supports IFR and 2X speed modes), and J1850 VPW (supports 4X speed mode). 4. Features: Supports J2534 and ELM327 modes in a single device, and features automatic switching, increased acceleration, and faster communication and reprogramming. 5. Advantages: More stability, never drops out during reprogramming, portable and convenient, small package and easy to carry. Specifications: Item Type: Car Diagnostic Tools Material: ABS 1. VNCI J2534 for Nano Compatible with J2534 Passthru and ELM327 Automatically diagnoses J1979 compatible vehicles 2. VNCI (Vehicle Network Communication Interface) is a device that operates between the diagnostic software and the vehicle. It is compatible with J2534 Passthru and ELM327. ​​Product Features: 1. Supports most J2534 compatible software. 2. Supports most ELM327 software. 3. Supports ECU reprogramming in J2534 mode with programming voltage. 4. Provides software for diagnosing J1979 compatible vehicles. Product Highlights: 1. Supports J2534 and ELM327 modes in a single device. Automatic mode switching. 2. Faster acceleration. Faster communication and reprogramming. 3. More stability. Never drops out during reprogramming. 4. Portable and convenient. Small case and easy to use. VNCI J2534 for Nano Protocol configuration: 1. ISO15765 (Standard/Extended Framework) 2. ISO9141. 3. ISO14230. 4. J1850 PWM (supports IFR and 2X speed modes). 5. J1850 VPW (supports 4X speed mode). 6. Programming voltage 7. Short circuit to ground 8. For ELM327 with command set version 1.5a VNCI J2534 for Nano hardware configuration: 1. High-speed CAN ISO11898-2 (OBDII PIN 6 and PIN 14. Speed ​​up to 1000 Kbps) 2. ISO9141 and ISO14230 K lines (OBDII PIN 7 and PIN 15) 3. J1850 PWM (OBDII PIN 2 and PIN 10) 4. J1850 VPW (OBDII pin 2) 5. Programming voltage (OBDII PIN 12 or PIN 13. Programming voltage up to 20 V) 6. Short circuit to ground (OBDII PIN 9. Short circuit to OBDII PIN 5) 7. Environmental: -20 ℃-45 ℃ ℃(-4℉-113℉) 8. Vehicle voltage requirements: 8-18V 9. Vehicle connection: Molded DLC3 (OBDII-16) 10. Host connection: USB 2.0 Package list: 1 x diagnostic tool