Generic Waterproof Motorcycle Speedometer for 1, 2, 4 Cylinder Motorcycles, Clear LCD Screen, Versatile, for Motorcyclists.

1. Applicable to universal motorcycle models. Suitable for 1, 2, and 4-cylinder motorcycles. 2. Made of high-quality ABS material, hard, durable, corrosion-resistant, and has a long service life. 3. The LCD screen makes it easy and clear to display information and can show detailed speed and direction information. 4. Supports speed display in km/h and mph; the speed display range is 0 to 199 km/h (miles). The odometer reads from 0 to 999,999 kilometers (miles) and indicates a distance of 999.9 km (miles). The speed display range is between 0 and 13,000 RPM. 5. Compact structure, easy to assemble, easy to use, bringing you more convenience. Technical Data: Condition: 100% Brand New. Item Type: Motorcycle Instrument Material: ABS Color: Black Time: 24 Hours Oil Level: 6-Part Display Power Supply Voltage: DC8-12V. Speed Display: km/h, mph Gear Position: 1/2/3/4/5/6 N. Speed Display Range: 0-199 km/h (miles) Internal Display: Odometer Display: 0-999999 kilometers (mi) Odometer Display Unit: 0.1 km Distance to Odometer: 999.9 km (miles) Odometer display unit: 0.1 km Speed range: 0-13,000 rpm Dimensions: approx. 200 x 80 x 100 mm / 7.9 x 3.1 x 3.9 inches Instructions: Wallpaper settings: Use a password to open the wallpaper. (Metric and imperial background values must be adjustable) Press and hold the left button to turn on the device and access the wallpaper settings interface. P000: Enter password 6610 4C1850: 1850 means circuit. Press and hold the left button; the bit unit will flash. Briefly press the left button +1, then press and hold the left button again to enter tens (0-9). Tens will flash. Briefly press the left button +1, then press and hold the left button again to move to hundreds (0-9). Hundreds will flash. Briefly press the left button +1, then press and hold. Press the left button again to move to thousands (0-9). Thousands will flash. Briefly press the left button +1 (0-2), then press and hold the left button again to access the magnet number setting interface. 4 means the number of magnets. Briefly press the left button +1, then press and hold the left button to save. After saving, briefly press the left button to access the metric system interface. 1-01: Metric 1-02: Imperial system, press and hold the number 1 until 001 flashes, briefly press the left button to move to 2, press and hold the left button to save. After saving, briefly press the left button to access the quick interface. 2-002: Speed 166 Hz = 10 x 1000 rpm, 2-004: Speed 333 Hz = 10 x 1000 rpm, press and hold the left button until the number flashes, briefly press the left button to change, press and hold the left button to save, then briefly press the left button to enter the fuel interface. 3-002: Dual-line fuel 3-003: Three-line fuel, long press left button to flash, short press left button to toggle, long press left button to save, and short press left button to access the instrument's main interface. Wiring Method: 9-PIN Light Blue: Right turn, 12V positive control, LCD screen. Yellow/Black: Speed signal Red: Battery (normal power, 12V positive) Blue: High beam, 12V positive control, LCD screen Green/White: Water temperature signal Green: 12V negative Orange: Left turn, 12V positive control, LCD screen Blue/White: Fuel signal Black: 12V positive 6-PIN Pink: 1 speed, negative control, LCD screen Blue/Red: 2 speeds, negative control, LCD screen Green/Black: 3 speeds, negative control, LCD screen Yellow/Red: 4 speeds, negative control, LCD screen /White: 5 speeds, negative control, LCD screen Green/Red: Neutral, negative control, LCD screen 3PIN Red/White: Positive sensor Green: Negative sensor Black and White: Sensor signal Round header: /Red: Engine fault, negative control, LCD screen Gray: 6 speeds, negative control, LCD screen Package List: 1 x Motorcycle instrument 1 x Speed sensor 4 * Accessories Note: 1. Please check the size and make sure it meets your needs. 2. Due to manual measurement, there may be a 0.5 to 1 inch error. (1 inch = 2.54 cm) 3. Depending on factors such as weather, lighting conditions, and even different screen resolutions, the photo may inevitably show slight color variations. Please note that this is not a quality issue.