REF PCCST150LHME30990904

Gledhill PulsaCoil Stainless Thermal Store Cylinder Left Hand Connections 150 Litre

In stock
In stock
Secure Payment
Delivery options
Free delivery (postcode specific) *
  • At home between 02/11/2021 and 03/11/2021 for any order placed before 5 pm - Free delivery (postcode specific) *
Product details

Gledhill, the cylinder specialist, has developed the new circular PulsaCoil Stainless range, a thermal storage cylinder manufactured from high corrosion resistant stainless steel, providing mains pressure hot water utilising off-peak electric, specifically designed for use in apartments.

The PulsaCoil Stainless is an open vented direct thermal store, which does not require a pressure and temperature relief valve and subsequently does not need any discharge pipe work. It therefore overcomes the requirement of the Part G Building Regulations which prohibits the connection of a discharge pipe from an unvented cylinder into a soil stack.

The domestic hot water is generated via a highly efficient plate heat exchanger. As hot water is demanded, it is mains cold water which is instantaneously heated as it passes through the heat exchanger and delivered to the taps. This method of generating the hot water completely removes the risk of Legionella. The innovative design helps make installation and on going maintenance straight forward for the installer.

Other benefits of the PulsaCoil Stainless include the fact that the immersion elements are situated in the same primary water at all times and this water is not renewed so no scaling takes place, even in hard water areas. As the cylinder can utilise the off-peak electricity supply it keeps the running costs for the householder down to a minimum.

Pulsacoil Stainless thermal stores do not require any annual maintenance, unlike with an unvented cylinder.

Key Features:

  • ErP Rating: C
  • Heat Loss: 47 Watts & 1.48 kWh/24hr
  • Unit Height: 1112mm
  • Min cupboard height: 1582 mm
  • Min cupboard Width: 670mm
  • Min cupboard depth: 650 mm
  • Unit Diameter: 550mm
  • Weight (empty): 36 kg
  • Weight (full): 186 kg
  • Thermal store volume: 151 L
  • Domestic hot water volume (above 40 degrees): 138 L
  • Maximum DHW Pressure: 5 bar
  • Immersion Heater
  • 5 year's guarantee from manufacturer
  • Circular feed and expansion tank, with improved aesthetics and reduction in height compared to previous rectangular option
  • Full insulation over pipework and plate heat exchanger
  • Provides mains pressure hot water
  • Maximises the benefit of available off-peak electricity tariffs
  • No annual maintenance or safety check requirement
  • No discharge pipework
  • Hot water is generated by passing mains cold water through a plate heat exchanger, eliminating any risk of Legionella
  • Option to use secondary heat source
  • No G3 qualification requirement for installation

Please Note:

  • The height stated in the table is to the top of the unit. Add 470mm to this height, which should allow for a 220mm high header tank and room for servicing. This will need to be increased by 125mm if the automatic fill method is chosen.
  • The top up cistern can be remotely sited above the PulsaCoil.
  • Full thermal store volume reheated from 35°C to 75°C.
*Free shipping availability will depend on your postcode, this information will be available at checkout.