REF PLUHP300SME31644550

Gledhill Stainless Lite Plus Heat Pump Solar Indirect Unvented Cylinder 300 Litre

Delivered in 3 weeks
Delivered in 3 weeks
Secure Payment
Delivery options
Free delivery (postcode specific) *
  • At home between 08/11/2021 and 15/11/2021 for any order placed before 5 pm - Free delivery (postcode specific) *
Product details
  • Capacity
    287 liters
  • Installation

This Gledhill Stainless Lite Plus Heat Pump Solar Cylinder is a range of unvented hot water storage cylinders which has been specifically designed to fulfill your requirements and it is known for its high efficiency levels and good performance. This heat exchanger is a totally new design. It consists of a multi-pass corrugated stainless steel tube in parallel to reduce the pressure loss whilst maximising the heat exchange. Many medium to large heat pumps need heat exchangers in the store that will cope with the higher flow rates associated with primary temperatures that are typically 50 or 60 degrees celsius. This Unvented cylinders designed for restricted spaces with optional solar coil. Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket. It is recommended that a thermostat is fitted which brings the immersion heater on at a temperature just below the heat pump maximum and switches off at 60 or 65 degrees celsius. In this way the use of direct electricity is minimised and most of the water heating is achieved through the heat pump. Every model is designed to deliver high performance and transfer the adequate amount of heat to stored water.

Key Features:

  • ErP Rating: C
  • Heat Loss: 86 Watts
  • Capacity: 287 L
  • Height: 1990mm
  • Diameter: 550mm
  • Weight (empty): 48 kg
  • Weight (full): 335 kg
  • Surface area of HP Coil: 2.04m2
  • Dedicated Solar Volume: 102 L
  • Number of immersions: 1
  • Secondary Return: Yes
  • Immersion Heater
  • Light in weight
  • Corrugated Coil
  • Solar Thermal
  • 25 year's guarantee from manufacturer
  • Designed for use with either air source or ground source heat pumps in addition to solar thermal panels
  • High efficiency corrugated coil maximises heat transfer to the cylinder of water
  • 3kW incoloy immersion heater for emergency back-up
  • 90° elbow and drain valve supplied as standard
*Free shipping availability will depend on your postcode, this information will be available at checkout.