Glow plug removal kit for damaged glow plugs, 0.3/0.4 inch, portable for cylinder head - 16 pieces

Features:1.Used to remove damaged 8mm/0.3 inch and 10mm/0.4 inch glow plugs from the cylinder head.
2.Ergonomic design, easy to use, highly efficient, and will not cause further damage.
3.Includes all necessary adapters to safely drill, center, and remove the glow plug.
4.Made of high-quality steel, strong resistance to rust and corrosion, long service life.
5. Comes with a plastic storage box, which keeps all the tools organized and easy to carry.
Specifications:Condition: 100% Brand New
Item Type: Glow Plug Removal Tool Kit
Material: Steel
Color: As shown in the picture
Box Size: Approx. 28 x 22 x 5 cm / 11 x 8.7 x 2 inches
Function: To remove damaged glow plugs from the cylinder cover; can be used to remove 8 mm / 0.3 inch and 10 mm / 0.4 inch glow plugs.
Instructions:
1.The T-profile nut is placed on the center electrode.
2.The electrode has been loosened with a nail gun.All the way around!Remove the center electrode.If the center electrode has not been loosened, unscrew and focus the electrode with the sleeve by unscrewing it.
3.The sleeve is placed on the center electrode, secured, and unscrewed with the included drill.
4. Mount the drill with the handle, drill to the right.This drill sleeve is lightly coated and applies a thick layer of grease.Caution: At low speeds, you must drill and remove debris several times during the drilling process.Drill it all the way through.
5.The thread drill bit cuts a length of ¼ inch wire into a 2 cm layer plug. It is particularly important to then remove impurities.
6. The threaded adapter piece turns the extractor and screws the ¼ inch spark plug thread.
7. The dessurubare sleeve is presented as a counter-support and dessurubeaza debris plugs with compression nut
8. Then connect the Reta wire.
9. You apply a thick layer of grease to the screwed drill bit, so that dirt does not fall into the engine's combustion chamber.

Package List:

1 x Ratchet T-Bar1 x Drill Bit Holding Adapter1 x Extractor Outer Housing2 x Nut1 x Top Connection Removal Tool, Star Socket1 x Hex Wrench3 x Tap (1/4 in. M8, M10)2 x High Strength Step Drill (M8, M10)2 x Pilot Drill (3.5mm)2 x Extractor Adapter Chuck1 x Plastic Box