Glow plug repair tool extractor kit Glow plug removal tool kit 16 piece damaged glow plug removal tool set 8mm/0.3in 10mm/0.4in.

Specification: Box size: approx. 28 x 22 x 5 cm / 11 x 8.7 x 2 inches. Function: To remove damaged glow plugs from the cylinder head; can be used to remove 8 mm / 0.3 in and 10 mm / 0.4 in glow plugs. Instructions: 1. Place the T-shaped profile nut on the center electrode. 2. Loosen the electrode with a tool. Pull the center electrode all the way around! Remove the center electrode. If the center electrode has not broken off, unscrew and focus the electrode with the sleeve by unscrewing it. 3. Place the sleeve on the center electrode, secure it, and unscrew the included drill bit. 4. Mount the drill bit and drill straight. Lightly coat the drill sleeve and apply a thick layer of grease. Caution: At low speed, drill and remove debris several times during the drilling process. Drill completely. 5. The thread drill bit cuts a ¼-inch length of thread into a 2 cm layer of plug material. It is particularly important to remove any debris afterward. 6. The threaded adapter is used to extract and screw in the ¼-inch spark plug thread. 7. The desurubare sleeve acts as a counter-support for debris plugs and desurubaza with a compression nut. 8. Then connect the Reta wire. 9. Apply a thick layer of grease to the screwed-in drill bit so that dirt does not fall into the engine's combustion chamber.