Goofit Single Pulse Generator (Crankshaft Position Sensor) Compatible with Kawasaki Ninja ZX-10R / Versys Series Independent Activation via Ignition Signal--DTEKGAZ

【High-Performance and Versatile Crankshaft Position Sensor for Kawasaki】This unique crankshaft position sensor was specifically designed for Kawasaki Ninja ZX-10R superbikes and the Versys series all-round touring motorcycles. Manufactured to Kawasaki's original specifications, it utilizes high-precision magnetic induction technology and a heat- and shock-resistant housing. It accurately detects crankshaft speed and position, providing the ECU with the necessary pulse signal to calculate ignition timing, fuel injection strategy, and auxiliary electronic functions. The stability and accuracy of the signal directly impact starting performance, throttle response, and overall engine efficiency. **[Precise Compatibility with Specific Vehicle Platforms]** This product is designed for compatibility with the specific engine platforms of the following Kawasaki models (actual compatibility should be verified using the part number or the product itself): Kawasaki Ninja ZX-10R (exact year, please check) Kawasaki Versys (exact engine size and year, e.g., Versys 650/1000, please check) (*Important Note: The ZX-10R and Versys series encompass different model years and engine sizes. There are differences in the engine platforms and electronic systems. This product is a general description and is not compatible with all models. Before purchasing, please check your vehicle's model, year, and engine size. For accurate compatibility, it is recommended to locate the original part number. A physical comparison is strongly recommended.*) **[Fixes Ignition and Electronic Control Issues]** Replaces the vehicle's original sensor due to wear. Internal coil demagnetization, magnet demagnetization, thermal or physical damage can effectively resolve the following issues: engine starting difficulties or failure (no crankshaft signal), very rough idling, frequent stalling, loss of power during acceleration, noticeable jerking, illumination of the Check Engine Light (FI), and possible storage of fault codes related to the crankshaft position sensor (e.g., P0335). [Professional Installation and Air Gap Adjustment] This product is a precision electromagnetic sensor that is typically mounted on the engine block side near the flywheel or timing sprocket. The critical installation step is the precise adjustment of the air gap between the sensor surface and the trigger teeth of the flywheel (or signal disc). This air gap must be set with extreme precision (usually between 0.3 and 1.0 mm) using a non-magnetic feeler gauge according to the exact specifications in the manufacturer's repair manual. An incorrect air gap will result in signal errors or total failure. [Scope of delivery] 1 trigger pulse sensor