Goofit Single Pulse Generator (Crankshaft Position Sensor) Compatible with Yamaha Drag Star / XVS650 (1997-2004) and Suzuki Burgman AN650 / LTA500 Scooters--DTEKGAZ

【Universal Multi-Brand Trigger for Yamaha/Suzuki】This product is a unique universal trigger (crankshaft position sensor/detection unit) for Yamaha Drag Star 650 (V-Star 650 / XVS650) models from 1997 to 2004, as well as for Suzuki Burgman AN650 and LTA500 maxi-scooters. Developed by analyzing two vehicle brands with potentially similar magneto ignition systems, this product provides a precise ignition signal to the CDI or ECU and serves as a crucial sensor element for engine starting and operation. [Cross-Model Compatibility Notes] This product is designed for functional compatibility with the following two model groups. However, physical compatibility must be 100% physically verified: Group 1: Yamaha Drag Star / XVS650 (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004) Group 2: Suzuki Burgman AN650 (large scooter) / Suzuki LTA500 (may apply to market-specific models) (Important note: This product is a high-risk, cross-brand compatible part. Yamaha and Suzuki motorcycles…) Engine platforms, mounting spaces, and part specifications of large scooters typically differ significantly. The inclusion of this product on this list may be due to aftermarket sensors from two different models having similar physical specifications (mounting hole spacing, sensor head dimensions, etc.). You must have the original part and be able to perform an exact physical comparison before purchasing. Compatibility of this product with a specific vehicle cannot be guaranteed. [Possible Problem Solutions (e.g., Perfect Match)] If this product is a perfect physical and electrical match for your original part, replacing it may resolve the following problems caused by a faulty sensor: starting problems (no ignition signal), starting difficulties, rough idling or sporadic stalling, and loss of power during acceleration. [Professional Installation and Air Gap Requirements (e.g., Match)] For a physical match, installation typically requires removing the magnetic cover or side cover. The critical installation step is precisely setting the air gap between the sensor head and the sensor teeth on the flywheel (or signal disc). The required air gap is exact (usually 0.3 to 0.8 mm) and must be set using a non-magnetic feeler gauge according to your vehicle manufacturer's repair manual. [Package Contents] Universal Single Pulse Unit × 1 piece