Goofit Single Pulse Generator (Ignition Sensor) Compatible with Yamaha Drag Star / XVS650 (2005–2008) Magneto-Stator Signal Coil Single Replacement Part

【Special Ignition Sensor for Yamaha Drag Star 650 (Model Cycle Update)】This independent ignition sensor (crankshaft position sensor) is specifically designed for the classic Yamaha Drag Star 650 cruiser motorcycles (also known as V-Star 650 / XVS650) from model years 2005 to 2008. It is an essential component of the ignition stator and detects the flywheel position, generates precise ignition pulses, and sends them to the ignition control unit. The accuracy and stability of this signal directly determine the engine's starting reliability, idling, and fuel efficiency. This product is specifically designed for the Yamaha Drag Star 650 / XVS650 models from model years 2005 to 2008. Compared to earlier models (1997–2004), the ignition system in these model years may have undergone minor modifications. This product exactly matches the original specifications of the respective model year. (Note: This product is a single ignition coil module. Please check your motorcycle's model year before purchasing and ensure your original stator's ignition coil is a separate, removable module. It is recommended to compare it to the original parts or consult a qualified technician.) [Targeted Solution for Ignition Signal Problems] If your Drag Star 650 is experiencing issues such as starting problems (especially in cold weather), rough idling, delayed throttle response, or occasional stalling, and the diagnosis points to an ignition signal problem, replacing this ignition coil is a more cost-effective solution than replacing the entire stator. [Professional Installation and Air Gap Adjustment] This product is a precision electromagnetic induction component. Installation requires removing the left magneto cover. The most important installation step is precisely adjusting the air gap between the ignition coil's induction head and the ignition contact on the flywheel. This air gap is subject to strict factory specifications (usually 0.2 to 0.5 mm) and must be adjusted using a non-magnetic feeler gauge (made of plastic or brass). An incorrect air gap will result in a weak signal or misfires. [Scope of delivery] Single-pulse ignition coil × 1 piece