Goofit Single Pulse Generator (Ignition Sensor) For KTM Motorcycles (Pulse Generator) Crankshaft Position Sensor Universal Replacement Part--DTEKGAZ

【Universal KTM Pulse Sensor】This product is a universal, single-pole pulse generator (pulsador/crankshaft position sensor) compatible with many KTM motorcycle engines. "Pulsador" is the common Spanish term for a pulse generator/trigger. This product features a robust, heat- and vibration-resistant industrial design and delivers precise crankshaft speed and position signals to the CDI or ECU. It is an important sensor component for the proper functioning of the ignition system. It can serve as a replacement solution when the exact part number of the original part is unavailable.

【Notes on Universal Compatibility (Specifications Not Exact)】

This product is universally applicable and functionally compatible with trigger pulse generators of similar dimensions and electrical parameters used in many KTM single-cylinder or twin-cylinder engines. This product may be compatible with certain models of the KTM Duke, RC, EXC, SX-F, and other series. (Important note: "Pulsador" is a generic term in this description and does not refer to a specific model. Ignition sensors vary considerably depending on the KTM motorcycle model and year, particularly regarding installation dimensions, mounting method, sensor head shape, resistance value, and connector type. Before purchasing, you must have the original part and be able to perform a 100% visual comparison. Compatibility of this product with a specific KTM motorcycle cannot be guaranteed.) [Possible Problem Solutions] If this product fits your original part perfectly, replacing it may resolve the following problems caused by a faulty ignition sensor: engine not starting (no ignition signal), starting difficulties, rough idle or sporadic stalling, and loss of power during acceleration. [Professional Installation and Air Gap Requirements (e.g., Matching)] If visual match is required, the magnetic cover or side panel usually needs to be removed for installation. A key element of the installation is the precise adjustment of the air gap between the sensor head and the trigger teeth of the flywheel (or signal disc). This air gap must be precisely set using a non-magnetic feeler gauge according to the specifications in your vehicle manufacturer's service manual (usually between 0.3 and 0.8 mm). [Scope of Delivery] Universal Single Pulse Generator × 1 piece