Goofit Single Pulse Ignition Sensor For Kawasaki Mule 3000/3010/3020/4000/4010 Multi-Purpose Vehicles Original Part Number: 59026-2065 Crankshaft Position Sensor--DTEKGAZ

【Crankshaft Position Sensor for Kawasaki Mule Off-Road Vehicles】This single-pulse crankshaft position sensor is specifically designed for Kawasaki Mule 3000, 3010, 3020, 4000, and 4010 series off-road vehicles. Manufactured to Kawasaki's original specifications (part number 59026-2065), this product features a robust, oil-, vibration-, and dust-resistant housing that withstands the constant vibrations and harsh conditions these vehicles encounter during transportation, agriculture, and off-road use. It accurately detects the engine's crankshaft position and delivers a stable and precise trigger signal to the ignition control unit. This essential electronic component ensures reliable engine starting and smooth operation under any load. [Compatible with many Mule series vehicle models] This product directly replaces part number 59026-2065 and is specifically designed for the following Kawasaki Mule series vehicle models: Mule 3000, Mule 3010, Mule 3020, Mule 4000, and Mule 4010. (Note: This product is fully compatible with Mule models that use the part numbers listed above. Please check the part number in your vehicle's owner's manual or on the original part before purchasing. This is the most reliable method to ensure perfect compatibility.) [Fixes common UTV starting and running problems] Replacing the original sensor, which is often the cause of a weak signal due to aging internal coil, magnet failure, wiring harness wear, or connector corrosion, effectively resolves the following issues: engine difficult or impossible to start; unexpected engine stalling or sudden loss of power while driving; rough idling and poor acceleration; No spark in the ignition system (after checking the correct function of other components such as the ignition coil and CDI). [Professional Installation and Air Gap Adjustment] This product is a precision electromagnetic induction sensor, typically mounted in the flywheel housing or magneto cover. For successful installation, precise adjustment of the air gap between the sensor head and the sensor teeth on the flywheel (or signal pinion) is crucial. This air gap is subject to strict factory specifications (typically 0.3 to 1.0 mm) and must be set using a non-magnetic feeler gauge according to the values in the Kawasaki Mule Service Manual. An incorrect air gap is the direct cause of a weak or missing signal. [Package Contents] Single Pulse Trigger × 1 piece