GT5105A 2000Ω Digital Earth Resistance Tester, Earth Resistance Meter, Ohm Meter for Earth Resistivity

Features:1.It can be used to measure the ground resistance value of various electrical installation wiring, electrical equipment, lightning protection equipment, and other grounding devices, and it can also measure ground voltage.
2.This professional digital insulation ground resistance tester has stable performance and reliable results.A variety of settings are suitable for more environments, and the voltage and resistance settings can be switched.
3.The reinforced insulation safety structure and double insulation protection make measurement safer and more reliable.20 sets of data can be stored.
4.It has more comprehensive functions and greater accuracy. It is equipped with a test line poor contact warning, an out-of-range indicator, and an OL out-of-range indicator.
5.Strike the P and the grounding nails deep into the ground.They are arranged in a row with the equipment to be tested, and are separated from each other by 5 to 10 meters. 2. This method is to use an exposed low ground resistance object as the electrode when the auxiliary grounding nail is inconvenient to use, such as metal wells, water pipes, power lines, public lands and building grounding terminals, all of which can be 2 four steps (E and P&C End) method.

Package List:

1 x Ground Tester earth resistor (battery not included)

2 x Grounding Nail

3 x Crocodile Clip Line (5m, 10m, 20m)

1 x Instruction Manual

1 x Portable Carrying Bag

1

Note:

Make sure the nail of grounding is inserted into the moist ground. Si le sol est sec, vous devez ajouter suffisamment d'eau et que la pierre ou le sol sablonneux doit devenir humide avant les tests.Use the existing auxiliary grounding nails to lay the device flat on the concrete floor, place a damp towel on top, and pour enough water to replace the measuring electrode.Generally, the measurement can be taken.