Gun extrudeur - Gun to coulis in stainless steel for mortar - Seringue to mortar with 4 nozzle - Pump to mortar manual

Materials high of range : the body of the gun is in stainless steel thick premium quality. Wear-resistant, resistant to the impacts, high strength and extends the service life.

Super can of suction : the new piston in rubber high quality is perfectly suitable to the body of the gun in stainless steel, which allows to the seringue of mortar of have a low resistance and a large power of suction,

which facilitates the suction of the cement.

New design : nozzle round nouvellement designed, the diameter of the nozzle can be cut to 9-14 mm,  can also be replaced to meet to your different needs. Particularly suitable for the jointoiement of tiles of floor.

【Size and application】Body of the gun : 660 x 140 mm, clog round : 9-20 mm, clog plate : 58 x 14 mm, large clog plate : 52 x 19 mm. It is suitable to the mortar ordinary, to the resin epoxy, etc.

【Good service】 If you have of questions on our products, not hesitate not to we contact to all moment, and our equipped after-wind fera of our better for you help to solve the problem.

It is a new gun to calfeutrer in stainless steel high of range. It is made of "pump of piston cars", which it gives the features of a large suction, of a efficiency of work high, of a use easy

and of a durability.

Recommended practical ：

1, if the proportion of sand and of cement is incorrecte, this entrainera of efforts. TO this stade, the proportion of sand must be reduced.

2, it is more economical of extraire the cement to a angle of 45° that of the extraire vertically.

3, when of the cleaning, remove the handle and the nozzle before that the cement not either dry and hardened-the in the water during 10 minutes. They necessitent few drops of oil after the cleaning and pull on the handle for a reuse easy.