Hand basin tap, hot and cold water tap with baked brass finish (with water supply line)

DESIGN: - Washbasin hand tap. - Low spout. - Carrond body.

QUALITY: - Carrond handle. - 25mm ceramic disc cartridge. - Hot and cold water. - Fixing kit included.

Dimensions - Total height: 17.5 cm - Height under spout: 11.2 cm - Width between water outlet and tap body axis: 10.5 cm

Check that the spout length is compatible with your sink (see technical drawing)

Advice for use and installation

- Before installation, we recommend thoroughly flushing the hot and cold water pipes to prevent dirt and residue from affecting the proper functioning of the tap. - After shutting off the main water supply, remove the old tap. - Carefully clean the threads of the main water supply pipes.

- Install the kitchen mixer tap in a 32+ mm hole in a sink or worktop.

Maintenance Tips

To keep your tap in good condition for as long as possible, ideally clean it daily with a damp, non-abrasive cloth or microfiber cloth, then finish by wiping it with a microfiber cloth or dry cloth. Never use solvents, metal scouring pads, bleach, acids, strong detergents, harsh chemical cleaners, or solvent-based cleaning solutions on the product. Note: All data is measured manually; please allow for an error of 1-5 cm. Due to differences in lighting and display, there may be some color variation; the actual product received will prevail.