Handheld garage door remote control 868.3 MHz - Compatible with HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS - 1 piece remote control

Compatibility: Our replacement garage door opener is compatible with HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS handheld transmitters. Note: If your original remote is not recognized, please do not purchase this product. Special note: If your original remote is not listed, please do not purchase this product. This remote is not the original remote; it is a replacement garage door opener. Two programming methods: copying the code from the original remote or programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. Compatibility: Our replacement garage door opener is compatible with the following handheld transmitters: HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, HSS4-868-BS. Note: If your original remote is not recognized, please do not purchase this product. Special note: If your original remote is not listed, please do not purchase this product. This remote is not the original remote; it is a replacement garage door opener. Two programming methods: copying the code from the original remote or programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work. Pack of 2 868 MHz garage door openers - Compatible with Hormann HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, and HSP4-868-BS handheld transmitters. Compatible remote control models: For HORMANN HS1-868-BS, HS4-868-BS, HS5-868-BS, HSE1-868-BS, HSE2-868-BS, HSE4-868-BS, HSP4-868-BS, HSD2-868-BS, and HSS4-868-BS. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. How to program: 1) Press and hold the button on the new remote you want to program the code from the original remote. While holding it, press another button three times until the red LED light illuminates for 10 seconds, then release all buttons. 2) Place the original remote as close as possible to the left side of the new remote. 3) Press the button on the original remote. You must copy the code until the LED flashes red and blue alternately. Check that the LED on the new remote flashes blue. If it doesn't, try moving it as close as possible to the original remote. 4) When the blue light on the new remote flashes rapidly, the programming is complete. Release all buttons. 5) Repeat the same procedure for the remaining buttons. Reset Method: Each button on the remote control is assigned a new radio code by following these steps: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote control. (3) Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will remain solid blue. (4) When you release the remote control button, all radio codes will be reassigned. Note: If the remote control button is released prematurely, no new radio codes will be assigned.