Hansender 2-Pack Wireless Garage Door Remote Controls 434.42 MHz Compatible with 4014 TX03-434-2, 4022 TX03-434-2, and 4013 TX02-434-4-XP 4-Channel Remotes

Aftermarket garage door opener, not original.

Specifications: Decoder IC: Rolling code. Frequency: 434.42 MHz. Batteries: Included. Transmission distance: 10-50 m in open space. Compatible models: 4014 TX03-434-2; 4022TX03-434-2; 4013 TX02-434-4-XP. Green and orange LEDs. Special note: Not compatible with SOMER 868MHz. Programming transmitters and receivers: The remote control has the same function as your original remote control and must be programmed with the original receiver according to your original manual upon receipt. 1. Locate the Learn/Code Set button on the motor. This is usually located under the light cover or on the back of the motor.

2. Press the learning/code setting button once, then release it. A light should illuminate. 3. Press the desired transmitter button once, and the light will turn off. 4. Press the transmitter button again. The light on the motor will flash and then turn off, indicating that the transmitter has been coded. 5. Test the remote control function.