Haofy SMPS Power Supply, Convenient Mounting Holes, 500W for Medical Equipment, AC 90-264V to DC 24V 20.9A, IP20 Waterproof Rating

1. [STABLE PERFORMANCE] Regulated switching power supply with an error range of ±1% and an adjustable pressure range of ±5%. 2. [POWERFUL OUTPUT] Provides a 24V 20.9A DC output with a maximum power of 500W. 3. [WIDE APPLICATION] Ideal for industrial automation, PLC control cabinets, medical equipment, etc. 4. [WATERPROOF DESIGN] IP20 waterproof rating for added protection. 5. [COMPACT SIZE] Product size of approximately 8.5x4.5x2.0" for easy installation and space saving.

Specifications: Item Type: Switching Power Supply Material: Aluminum Alloy Model: YY-500-24 Input Voltage: AC 90-130V, AC 170-264V Output Voltage: DC 24V Output Current: 20.9A Error Range: ±1% Adjustable Pressure Range: ±5% Power: 500W Maximum Ingress Protection Rating: IP20 Start-up, Rise, Hold Time: 200ms, 50ms, 20ms Operating Temperature and Humidity: -10-60℃, 20%-90% RH Storage Temperature and Humidity: -20-80℃, 10%-95% RH Size of the Product: Approx. 215x115x50mm/8.5x4.5x2.0 inches. Application: Industrial automation, PLC control cabinet, DC motor, medical equipment, access control display system, lighting equipment, LED advertising, LED equipment. Package List: 1 x Switching Power Supply. Note: Before using the switching power supply, please carefully read the instruction manual to verify that the switching power supply's current and voltage, as well as the load current and voltage, meet the operating requirements. 1. When using the switching power supply, be careful of the internal high-voltage components and do not touch any internal parts. Non-professionals should not disassemble the power supply for maintenance, as this may result in electric shock. Before use, read the relevant connection markings. 2. When connecting, please turn off the power supply. 3. To ensure safe operation and reduce interference, please ensure that the FG ground terminal is reliably grounded. (The diameter of the ground wire should be reasonably selected based on the input voltage and output power.) 4. Check that the mounting screws are in contact with the power supply board components and measure the insulation resistance between the housing and the input/output to prevent electric shock. 5. The main part of the LED switching power supply housing is the heat dissipation area. During installation, maximize the contact area between the housing and the components to facilitate heat dissipation and extend the power supply's lifespan. If the power supply is equipped with a built-in fan, the fan vent must not be blocked. 6. Before completing the installation, please carefully check that the connection is correct to avoid incorrect or reverse connections, and then start the power supply only after confirming that it is correct.