HAVC Condensate Pump, 100‑240V 100L/H 0.6 L Automatic Condensate Disposal Pump with Safety Switch, AC Condensate Removal for Air Conditioner, Oven

0.6L WATER TANK: The condensate pump is equipped with 0.6L water tank, which is enough to accommodate the amount of water that needs to be discharged from the ice maker, the water flow reaches 100L/H, efficient drainage.
STABLE OPERATION: The water pump adopts 5W motor and works with low noise of 22 decibels, this which will not disturb your daily life, the ventilation hole quickly dissipates heat and the shock absorption foot reduces noise and improves its stability.
AUTOMATIC FUNCTION: The condensate drain pump is designed with automatic operation and a stop function, with an inlet of 25mm and an outlet of 10mm. When the water reaches the lower probe it starts working and when it is full of water it triggers self-draining.

WATER LEVEL SENSOR: 2 wires can be directly connected to the HAVC device to obtain a safety switch. When the sensor detects high water level, the switch will trigger and automatically turn off the device to prevent water overflow. APPLICABLE RANGE: This automatic condensate drainage pump is very suitable for commercial ice makers, air conditioners, stoves, dehumidifiers, etc., used in homes, beverage stores, offices, shopping malls, etc.

Specifications

Item type: Condensate pump
Model: QS 100L
Material: ABS
Power: 5 W
Voltage: AC 110-240 V
Maximum delivery height: approximately 2 meters
Maximum flow rate: 100 L/h
Water tank capacity: 0.6 L
Inlet outer diameter: approximately 25 mm
Output outer diameter: approximately 10 mm
Noise: 22 decibels
Operating level: Non-continuity
Applicable power: 15 kW (1P-5P)

Instructions for use

1. Turn off the power supply.
2. Two water inlets are available: one on the top of the pump and one on the left side. Please choose a suitable exhaust outlet. The outer diameter of the water inlet is 20 mm.
3. Attach the installation plate to a suitable location (provided in the accessory kit).
4. Connect the system drain hose to the drain pump inlet. Connect the drainage port of the pump to a plastic pipe of 9mm outer diameter and 6mm inner diameter, then secure it with a clamp (provided in the accessory kit).
5. The drainage device cannot be installed inside the air conditioner or in the power box.
6. Once the system is properly connected, make sure the drainage pump is turned on, run the air conditioner and check for proper operation.If the pump is not working properly, the system will automatically cut off power. Please contact a qualified service technician for any repairs.

List of packages

1 condensate pump
2 tubes
2 clamps