Headset and Pedal Assembly/Repair Press Tool, Aluminum + Alloy Steel

🔹Haut Propision - Due to the different diameters at the front of the pressure piece (φ52, φ55, φ46.9, φ44, φ41, φ34), it can accommodate different bearing sizes and achieve precise positioning. The φ36 diameter push piece at the rear ensures that the base bearings are not damaged during installation, further increasing installation accuracy.
🔹Maintenance - Apply a small amount of lubricant before use. When installing the head bearings, adjust the pressure piece forward and press down slowly. Check if the head bearing is warped and install only one side at a time. When installing a base bearing, the pressure piece must be set rearward. Ensure the bearing cups are not warped to avoid damaging the bearings during installation.
🔹Utilian Fit - the T-handle provides better torque control and the threaded rod is adjustable in length (max 150 mm) to accommodate different component widths. Washers and locknuts provide additional stability during the installation process.
🔹Applicator - typically used when assembling new bicycles to ensure that the top and bottom bearings are correctly installed. It is also used to replace worn top or bottom bearings. Particularly suitable for situations requiring precise alignment and even pressure.
🔹Self-adhesive - As product quality is checked at the factory before packaging, a small amount of grease may occasionally adhere to the product. If you are not satisfied or if the product does not work, please do not hesitate to contact us.