High-efficiency single-phase solar panel with 400W grid-tie micro-inverter APPLI control

Features:

1. [Remote Control] The solar microinverter allows you to check its operating status from anywhere and adjust power parameters flexibly and conveniently, without needing to be on-site.
2. [Safety Design] The solar microinverter has a built-in fuse and protection devices, with input and output reverse polarity protection to prevent damage from reverse connection.
3. [Premium Material] The solar inverter is constructed of aluminum alloy, ensuring strength and durability, and providing heat dissipation for the internal electronics.
4. [High Efficiency] The solar panel microinverter has a maximum efficiency of 95% and a rated MPPT efficiency of 99.5%, ensuring high conversion efficiency.
5. [Waterproof] The IP66-rated solar microinverter ensures safe outdoor use, resisting water and dust, and suitable for various environmental conditions.

Specifications:

Item Type: 15A Solar Microinverter
Output Data (AC):
Single Phase Network: 90-260V (self-adapting)
Rated Output Power: 400W
Maximum Output Power: 400W
Rated Output Current: 120V AC: 3.3A, 230V AC: 1.7A
Rated Output Voltage: AC 120V, AC 230V (actual 90-260V adaptable)
Default Output Voltage Range: AC 120V (80-160 V), AC 230 V (180-270 V)
Nominal Output Frequency: 50 Hz 60 Hz
Default Output Frequency Range: 50 Hz: 47.5 Hz-51.5 Hz, 60 Hz: 58 Hz-61 Hz
Power Factor: >0.99%
Total Harmonic Distortion: THD
Maximum Units per Branch: 120 V AC: 6 units, 230 V AC: 11 units
Efficiency:
Maximum Efficiency: 95%
MPPT Nominal Efficiency: 99.5%
Nighttime Power Consumption: Mechanical Data:
Operating Temperature Range: -40℃ to +65℃
Storage Temperature Range: -40℃ to +85℃
Maximum AC Bus Cable Current: 20A
Waterproof Rating: IP66
Cooling Mode: Convection, Fanless
Other Features:
Communication: WIFI (cloud monitoring)
Transformer Design: Transformer, Electrical Insulation
Integrated Grounding: Ground connection provided by PE in the AC cable, no additional grounding required
Guard Functions: Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection etc.
Design conformity:
EN IEC61000-3-2:2019+ A1:2021
EN 61000-3-3:2013+ A1:2019+ A2:2021
EN IEC55014-2:2021, EN IEC55014-2:2021

How to use:

1. Use the screws provided with the machine to install and secure the inverter to the photovoltaic panel support. 2. Connect the photovoltaic panel's DC connection plug to the inverter's DC input terminal, matching the positive and negative poles. 3. Open the waterproof cover of the inverter's AC output connector and connect the AC connection wire to the waterproof AC plug. 4. Connect the AC output line to the main AC cable. 5. Repeat steps one through three, install and connect all inverters. 6. Connect the main AC cable to the mains power grid to begin your journey to green energy.

Package List:

1 x Grid-Connected Solar Microinverter

1 x Output Cable

1 x Antenna

4 x Screws

4 x Washers

4 x Nuts

1 x User Manual

Note:

The output cable does not come with a plug; customers must purchase the appropriate plug for installation.