High power Relay Module Self Locking Power off Delay ON OFF Pulse Signal 12V

1、Output capacity: AC 250V / 30A, DC 30V / 30A or less

2、Using the industry's top quality ultra-small optocoupler, anti-interference ability, stable performance

3、Adopt 9.5mm black fence type connection terminal, standard 30A terminal, stable and firm, reliable quality

4、Delay time range: 0 seconds, ~100 minutes can be adjusted, the minimum 1 second adjustable

5、With the function of permanent memory mode when power failure

Features:

Output capacity: AC 250V / 30A, DC 30V / 30A or less

Using the industry's top quality ultra-small optocoupler, anti-interference ability, stable performance

Adopt 9.5mm black fence type connection terminal, standard 30A terminal, stable and firm, reliable quality

Delay time range: 0 seconds, ~100 minutes can be adjusted, the minimum 1 second adjustable

With the function of permanent memory mode when power failure

It can control dc or ac load up within 30A

Specification:

Model:YYLOCK-2

Voltage:5/12/24 V(Optional)

Output capacity: AC 250V / 30A, DC 30V / 30A or less

Delay time: 0 s~100min

Weight: Approx.55g/1.9oz

Function List Description:

P - 1: self - locking

To a signal relay pull (work), give a signal relay to stop (stop)

P

- 2: signal, relay pull, input signal is disconnected, after a period

of time after the output power; in the delay period to keep the signal

output again, time to stop, the equivalent of power delay

P

- 3: to signal, the output work for a period of time automatically

stop; in the delay period to the signal is invalid,If the signal is

shorted directly can be achieved: power output work delay for a period

of time off until the power

P

- 4: signal for more than a certain time, the output work; signal

disappears, timing is cleared, the output stops,If the signal is

directly shorted to achieve: power delay for a period of time

automatically pull the relay until the power

Module Interface Description:

DC +: External DC power supply positive

DC-: External DC power supply negative

IN: signal input (positive trigger, high level, connectable button, PNP sensor, etc.)

NO: relay normally open interface, relay pull before the suspension, after the connection with the COM shorted

COM: relay common interface

NC: relay normally closed interface, the relay before the connection with the COM shorted, pull after the suspension

Package list:

1 x Relay switch Module