High Power Wireless 433MHz Remote Control Switch, RF Remote Control AC 220V/240V/110V 30A for Lights, Water Pumps, Household Appliances, and Agricultural Irrigation

【Unique Design】433MHz RF Wireless Remote Control Switch. Stable and reliable performance, receiving sensitivity (> - 105dBm). A strong signal can penetrate walls, floors, and doors. It can control the receiver from anywhere within a reliable distance. The maximum range can reach 164 feet without obstacles.

【Easy to Use】: Extremely easy to set up and reset. There are 3 operating modes (momentary/toggle/locked) to choose from. You can easily configure it yourself according to your needs. The product's operating mode is adjustable. This item is already set to locked mode. The "ON" button turns it on, and the "OFF" button turns it off. 【High Sensitivity】 The receiver uses a 30A relay, capable of handling high-power electrical devices to ensure long-term stable control. Each receiver can store approximately 20 transmitters. One transmitter can also control multiple receivers (the transmitter must be compatible with the receiver). 【Quality Assurance】 High-quality relays with a lifespan of over 100,000 uses make this product more stable and reliable. The high-power terminals can handle a current of 30A, ensuring good performance even with unstable current. The receiver is suitable for a voltage of 85V ~ 240V, offering more flexible use. [Wide Application] The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control each device connected to the relay receiver via the remote control. such as lights, pumps, wireless security alarms, fans, lamps, ventilation devices, monitors, printers, fountains, and other electrical equipment, etc.

【Secure System】 The chip code is the EV1527 learning code, which is the most popular technology, making the remote control system more stable.

【Strong Signal Reception】 There is an antenna on the receiver, so you can extend it yourself to obtain stronger signal reception. The remote control distance can be up to 50 meters.

【More Flexibility】 Extremely easy to set up and reset. You can easily add additional wireless switches yourself as needed.

Product Parameters

AC 85V~265V 30Amp

Voltage: AC 85V~265V

Max Current: 30A

RF Frequency: 433MHz

Supported Encoding: 1527 learning code

Receiving Sensitivity: > 97dBm

RF Operating Mode: ASK superheterodyne wireless reception

Operating Temperature: -30~+80°C

Receiving Range: Open space is more than 50 meters

Standby Current: <5mA

Locked Mode

Press the "ON" button, the relay will light up; Press the "OFF" button, the relay will turn off.

Installation

Press the learning button (on the receiver) 3 times. Wait 3 seconds;

Press the "ON" button on the remote control. Wait 3 seconds.

Press the "OFF" button on the remote control. Success.