High-pressure DC self-suction electric diaphragm micro pump for car wash cleaning, 6L/min (12V (0142HB-12-80F))

Features:1.Possesses strong adaptability, with a maximum temperature resistance of 80 degrees Celsius, and is resistant to acids, alkalis, corrosion, and pesticides.
2.Adopts a high-quality micro-self-priming booster pump head and a high-efficiency DC motor, which features low power consumption, water and energy saving, and environmental protection.
3.The interfaces are all standardized in size, easy to connect, and highly versatile.
4.A cooling fan is installed at the rear of the motor, which can effectively extend the motor's lifespan and reduce heat generation.
5.Used in industrial equipment, chemical equipment, ships, beverage filling, household cleaning, water purification, and water treatment equipment.
6.Also suitable for vehicle cleaning, agricultural spraying, artificial misting, pipeline pressurization, air conditioning cleaning, cooling, coal metallurgy, garden spraying, etc.
Specifications:Item Type: Micro-diaphragm Pump
Material: Engineering Plastic
Type: Self-Selecting Backflow
PRODUCT POWER: 80W
Maximum Pressure: 9kg
Working Pressure: 5.5kg
Opening Flow Rate: 6L/min
Vertical Suction Lift: approx. 1.5 meters / 4.9 feet
Head: approx.90 meters / 295.3 feet
Product application scenarios: watering flowers, watering vegetables, spraying, pesticide spraying, etc.

How to use:1.Connect the pump to the inlet and outlet hoses.Ensure that the inlet and outlet hoses are securely connected to the pump; otherwise, it will cause low pressure or water leakage (there are arrows on the pump cover to indicate the direction of water in and out, and the direction of the arrows is the direction of water flow). 2. Install a filter at the water inlet. The filter density must be greater than 80 grains (i.e., 80 small holes per square centimeter). 3. Connect the micro-diaphragm pump to the motor. The electrical parameters of the connected power supply must meet the motor's input requirements. 4. Turn on the power; the motor pump will start running. 5. Eject water for 5-10 seconds, drain the air from the pump and the pipeline, and wait for the water to stabilize. Temporarily turn off the power, then connect the water gun or pump head, etc. 6. Turn on the power to operate.
Package List:1 x Micro-diaphragm Pump