High-pressure water boost pump 180W – For kitchen and shower taps DC24V – Increases domestic flow and pressure

Features:

1. BRASS MOTOR: Using all brass wire motor, owns long time working, full power, double protection to prevent burns
2. Space saving: This booster pump is compact and does not take up space, which can also be installed in a narrow space, lightweight, quiet, brings rapid boosting.
3. GREAT PROTECTION FUNCTION: Has intelligent start stop and low pressure protection function, when the water in the pump is close to 0 water pressure, the pump will stop working, automatic protection
4. EASY TO INSTALL: Quiet and energy efficient, high efficiency and low power consumption, provide a quieter and more comfortable environment for your family. Easy installation, just need a wrench to connect the pump, saving you plumber fees.
5.WIDE APPLICATION: Diaphragm pumps retain the low power and pressure settings of the original series and can also be used in environments where high flow rates are not required, suitable for taps, toilets, boilers, showers, bathrooms, kitchens, water heaters, and solar systems.Also used in garden nozzles, showers, agricultural irrigation, domestic water systems, etc.
Specifications:Item Type: Booster Pump
Material: ABS, Brass
Current: 4.0 A
Power: 180 W
Flow Rate: 35 L/min
Head: Approx. 25 meters / 82 feet
Size: DN15
Protection class: IP56
Installation: Install a booster pump 50 to 80 centimeters from the pump's water outlet.It can achieve the best water pressure effect.

Package List:1 x Booster Pump1 x Power Adapter2 x Anchors1 x Water Hose1 x Non-Drill Adhesive Sticker1 x User Manual
Note:1. This pump does not have suction and must be installed on the water supply. Water must be present in the booster pump before operation to increase pressure.2. This product is only suitable for pressurizing a short-distance tap. Installing a longer water line will result in insufficient pressure. The product is initiated by the induction of the water flow. If the water flow is too low, it will cause inductance and stop starting. The water flow will need to be increased to restart pressurization!