1/4
High temperature seller. Self-adhesive seal for chimneys - 2 m. Heat resistant glass fiber solder (550°C) - 2 mx 15 mm x 3 mm.
Sale
-3%
Of which environmental contribution £0.01 including VAT.
Sold by LinzGain Sarl
Product information
Description
- 【USO VERSATIL】: Suitable for estufas/chimeneas, parrillas, humidadores, conductos de humos y conductos de cables, both interiors and exteriors. Over dimensions of 2 mx 15 mm x 3 mm are sufficient for diary use.
- 【EASY TO USE】: The seal for chimneys is self-adhesive. It is covered with a double-sided adhesive tape that is heat-resistant and easy to apply without additional adhesive. Clean and seal the surface, remove the protective film, apply the tape, dry for 12 hours, there you go! 【HIPER SELLADO】: Thanks to the glass fiber used and the best in manufacturing, the soldering belt for the product supports temperatures of up to 550°C and is proven to be without humidity. 【IMPORTANT SAFETY】: The adhesive tape only has to be used to secure the seat belt. This should be kept in its place for friction, for example, in window sales, expansion sets, video holders and tube accessories. Excess temperature may cause the belt to appear, for example, in tapas, rejillas, doors and chimneys. 【CONSEJOS】: When used on a vertical surface, a component is required to secure the saddle cord. On the contrary, it will be necessary to aggregate the cables so that they are resistant to fire to be repaired.
Features
- BrandLIIYIELA
- ColourSilver-coloured
- Width15 mm
- Pcs per pack1
- MaterialFibreglass
Advice from
Washer and O ring buying guide
All plumbing or mechanical connections need to be sealed using a rigid or flexible waterproof barrier. Static and dynamic connections can be made watertight using fibre or rubber washers, O rings or lip seals, all of which need to chosen to match the type of liquid and pressure they are required to contain.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}