High Torque Clock Movement Mechanism Large Quartz Wall Clock Long Hands Walnut Wood DIY Parts Repair Replacement 31mm

General DescriptionThis high-torque clock movement mechanism is ideal for repairing, replacing, or building a clock. It operates with a quartz movement, providing precise timing and energy-efficient operation. This kit includes well-sized replacement parts suitable for long-hand clocks and is designed to meet various installation needs.Technical SpecificationsRated Voltage: 1.5VBattery Life: Approximately 12 months (UM-3)Uses one 1.5V AA battery (not included)Movement Dimensions: 56 x 56 x 16 mmHand Dimensions: Hour 223 mm, Minute 285 mm (measured from the center of the circle), Thickness 3 mmTotal Shaft Length: 31 mmThread: 24 mmApplicable Panel Thickness: 19-21 mmApplicable Panel Diameter: 60-70 cmMaterial: Plastic and walnutInstallationTo install the clock mechanism, follow these steps:Attach the clock movement to the product to be installed.Ensure that the hour and minute hands are parallel during installation.Remove the positioning pin behind the mechanism and insert the battery (do not insert the battery before removing the pin).Refer to the installation diagram for the method of installing the hands.The three pins should be parallel when viewed from the side.UseThis mechanism is versatile and can be used for:Repairing household clocks.Replacing faulty clock movements.Making craft clocks.Using in three-dimensional embroidery projects and of watchmaking.Other informationPackage contents: 1 x quartz clock movement, 2 x clock hands, 1 x accessories.Note: Colors may vary slightly due to lighting and different screens.Measurement error allowed: +/- 1-3 cm.