Hot and Cold Water Mixer Valve, Solid Brass Thermostatic Mixer Tap, Fixed Temperature Tap for Kitchen, Bathroom, and Toilet Sink, G1/2, 35-45℃, 15mm

Thermostatic mixer is easy to install: Size: G1/2" (DN15), all 15mm plug connectors, suitable for your bathroom. Marked "H" for hot water inlet. Marked "C" for cold water outlet. Thermostatic valve operating pressure 0.03 to 1.0 MPa, recommended pressure 0.1 to 0.5 MPa. If the working water pressure exceeds 1.0 MPa, install a pressure reducing valve on the pipeline. Enjoy a constant temperature of 38°C: Cold water inlet temperature: 5-29°C, hot water temperature: 50-95°C, mixed water: 35-45°C, setting accuracy: ±2°C, recommended pressure: 0.1 MPa-0.5 MPa. The valve thermostat can be set to 38°C with a safety switch, allowing you to control the temperature at 38°C. C or increase it to the maximum value of 42°C. This allows you to enjoy a pleasant shower even in cold winter weather. Don't worry about sudden chills.
Intelligent Temperature Control: Compared to a regular thermostatic mixer, our thermostatic mixer can automatically balance the pressure of hot and cold water in a very short time to maintain a stable water temperature. Therefore, no manual adjustment is necessary. The thermostat's response time is approximately 3 seconds.
Corrosion Protection and Durability: Solid brass internal construction with a chrome finish. Robust brass body, easy to install, precise control, and long service life, ensuring quality and durability. The faucet resists tarnishing and corrosion during daily use. You can use it to supply the washing machine with hot water from the solar system. This saves a significant amount of electricity when washing.
Application: The thermostatic shower valve is perfectly suited for use in bathrooms, shower rooms, kitchens, laundry rooms, and homes. Suitable for retirement homes, schools, offices, hotels, etc. Ideal for both private and commercial use.

Size: G1/2" (DN15), all 15mm plug connectors, suitable for your bathroom.

Marked "H" for hot water inlet. Marked "C" for cold water outlet. Thermostatic valve operating pressure: 0.03 to 1.0 MPa, recommended pressure: 0.1 to 0.5 MPa.

If the working water pressure exceeds 1.0 MPa, install a pressure reducing valve on the pipeline.

Cold water inlet temperature: 5-29°C, hot water temperature: 50-95°C, mixed water: 35-45°C, setting accuracy: ±2°C, recommended pressure: 0.1 MPa-0.5 MPa. The valve thermostat can be set to 38°C with a safety switch, and you can control the temperature at 38°C or increase it to the maximum value of 42°C. This allows you to enjoy a pleasant shower even in cold winter weather. Don't worry about sudden cold.
Specification:Use: Pipe Water Faucet, Suitable for Sink, Bidet, Shower
Water Pressure: Working Pressure: 0.03-1.0 MPa, Recommended Pressure: 0.1-0.5 MPa
Temperature: Cold Water Inlet: 5-29°C, Hot Water Inlet: 50-95°C, Mixed Water: 35-45°C, Adjustment Accuracy: ±2°C
Flow Rate: 11.67 L/min at 1 bar water pressurePackage Included:
1 x Thermostatic Mixer

Sold by Leway Store