1/5
HSS tap set, 6-pack taps, metric threads M3-M10 drill bits, metric taps for cutting various threads--BIEMMEDUE
Sold by APD Funding
You may also like
Compare with similar items
Product information
Description
General Description: This product is unused, has been repackaged in our warehouse, and is fully functional. The HSS tap and die set contains 6 metric taps suitable for cutting various threads. Specifications: Material: High-speed steel with a nitrided finish; Hex threads: M3, M4, M5, M6, M8, M10; Pitch: 0.5 mm, 0.7 mm, 0.8 mm, 1 mm, 1.25 mm, 1.5 mm. Application: These taps are designed for operations such as drilling, tapping, and chamfering on a drill press. They significantly reduce the number of machining steps and time required, while increasing work efficiency. Additional Information: The spiral taper prevents thread damage from over-tapping. Self-centering tip; no additional drilling or centering is required.
Features
- BrandBIEMMEDUE
- Metric thread not standard threadM10
- ManoMano ReferenceME222333892
- MMID227772741281
- Product code6YLYG20260614-12511
Advice from
Taps and dies buying guide
Taps and dies are essential to make or re-thread a screw, a nut or any other mechanical element. The three-piece tap sets are the most commoly used and the tap wrench is as important as the die stock for a proper tapping. Drilling is required before tapping.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}