HX711 Arduino Pressure Sensor Module, 50kg/100kg/200kg Load Strain Gauge, 4-Piece Load Cell Kit, Arduino DIY Compatible, 34 x 34mm A

Product Information 24-Bit HX711 Chips This Arduino pressure sensor module uses a high-precision 24-bit HX711 A/D converter chip, designed for high-precision electronic scales. Fast and agile response, accurate measurement data, virtually error-free. 128x Gain The HX711 module has two analog channel inputs with a built-in programmable amplifier with 128x gain. Multi-Use The input circuit can be configured as a bridge sensor, providing bridge pressure sensor modes (e.g., pressure, weighing), making it an ideal high-precision, low-cost front-end sampling module. High Sensitivity The Arduino force sensor boasts high accuracy and sensitivity, as well as a small size. High Sensitivity The Arduino force sensor boasts high accuracy and sensitivity sensitivity as well as a small volume. HX711 pressure sensor strain gauge weight sensor - Arduino pressure sensor Arduino force sensor 100kg weighing sensor HX711 Arduino weight sensor weight sensor deformation resistance sensor body load cell Specification: Sensor size: 34 * 34mm/1.34 * 1.34in Internal sensor construction: 1000ohm half-bridge strain gauge Measuring range: 50kg/100kg/200kg Package list: 4 * Arduino pressure sensor 1 * HX711 module User manual: When measuring, the outer side is correctly applied with an external force. The E-shaped strain gauge beam portion of the sensor (i.e., the beam arm with the white rubber in the middle of the strain gauge) and the outer side must exert a shear force in the opposite direction. This means the middle of the strain gauge beam must be able to undergo bending changes under stress, and there must be no obstruction on the other side of the strain gauge beam. Inside the sensor is a set of half-bridge strain gauges, which can be used in three ways: 1. Use one sensor with an external resistance to form a full-bridge measurement. The range is the range of one sensor: 50 kg. This requires higher external resistance requirements. 2. Use two sensors to form a full-bridge measurement. The range is the sum of the ranges of the two sensors: 50 kg x 2 = 100 kg. 3. Using four sensors to form a full bridge measurement, the range is the sum of the ranges of the four sensors: 50kg x 4 = 200kg. Note: Please note that the new and old types of this product will be sent randomly, and please ensure this is acceptable to you before ordering. Specifications: Width 10 cm, Height 10 cm, Weight 0.1 kg, Color Black, Ref. ManoManoME96039299. See all. Learn more.