HX711 Arduino Pressure Sensor Module, 50kg/100kg/200kg Load Strain Gauge, 4-Piece Load Cell Kit, Arduino DIY Compatible, 34 x 34mm A

Product Information

24-Bit HX711 Chips This Arduino pressure sensor module uses a high-precision 24-bit HX711 A/D converter chip, designed for high-precision electronic scales. It offers a fast and agile response, accurate measurement data, and virtually error-free performance.

128x Gain The HX711 module has two analog channel inputs with a built-in programmable amplifier with 128x gain.

Multi-Purpose The input circuit can be configured as a bridge sensor, providing bridge pressure sensor modes (e.g., pressure, weighing), making it an ideal high-precision, low-cost front-end sampling module.

High Sensitivity The Arduino force sensor boasts high accuracy and sensitivity, as well as a small volume.

High Sensitivity The Arduino force sensor boasts high accuracy and sensitivity, as well as a small size.

HX711 Pressure Sensor Strain Gauge Weight Sensor Arduino Pressure Sensor Force Sensor 100kg Weighing Sensor HX711 Arduino Weight Sensor Weight Sensor Strain Resistance Sensor Body Load Cell

Specification: Sensor Size: 34 * 34mm/1.34 * 1.34in Sensor Internal Construction: 1000ohm Half-Bridge Strain Gauge Measuring Range: 50kg/100kg/200kg

Package List: 4 * Arduino Pressure Sensor 1 * HX711 Module

User Manual: When measuring, the outer side is correctly applied with a External force. The E-shaped strain beam portion of the sensor (i.e., the beam arm with the white rubber in the middle of the strain gauge) and the outer side must exert a shear force in the opposite direction; that is, the middle of the strain beam must be able to undergo bending changes under stress, and there must be no obstruction on the other side of the strain beam. Inside the sensor is an assembly of half-bridge strain gauges, which can be used in the following three ways: 1. Use one sensor with external resistance to form a full-bridge measurement. The range is the range of one sensor: 50 kg. Requires higher external resistance demands. 2. Use two sensors to form a full-bridge measurement. The range is the sum of the ranges of the two sensors: 50 kg x 2 = 100 kg. 3. Using four sensors to form a full bridge measurement, the range is the sum of the ranges of the four sensors: 50kg x 4 = 200kg Note: Please note that the new and old types of this product will be sent randomly, and make sure this is acceptable to you before ordering. Specifications: Width 10 cm Height 10 cm Weight 0.1 kg Color Black Ref. ManoManoME96039299 See all Learn more