Hydrogen water bottle with colored lights, platinum titanium electrode, 2 speeds, 2 concentrations, leak-proof, portable hydrogen water generator, silver

Features:

1. Material: The hydrogen-rich water bottle is made of food-grade, transparent PC material, which is safe, nano-electrolyzed, and easy to clean. No water leaks, even when shaken 360 degrees. The entire unit is double-slip and leak-proof, so you can carry it outside the home and use it with confidence.
2. PLATING TECHNOLOGY: The cathodic plating of the hydrogen water bottle ensures safer hydrogen production from pure water, and the anodic plating makes the hydrogen production time more stable and durable. The proton film helps produce hydrogen efficiently.
3. SEVEN COLOR-CHANGING LIGHTS: Adopting seven-color light activation technology, with a beautiful light-changing effect, full of scientific and technological appeal.
4. PEM HYDROGEN GENERATION TECHNOLOGY: Water (pure or distilled) that meets the requirements is introduced into the hydrogen molecule generator via a special device. Under the action of an electric current, the water is decomposed into H2 and O2, and the H2 and O2 are separated.
5. 2 OPERATING TIMES, 2 CONCENTRATIONS: One press of the on/off button: 5 minutes, with a water-soluble hydrogen content of 6000 ppb+; two presses of the on/off button: 10 minutes, with a water-soluble hydrogen content of 8000 ppb+.
6. PRESSURE RELIEF DESIGN: The bottom has a one-way exhaust vent, which effectively releases other gases and makes the drinking water healthier. At the same time, the decompression technology makes opening the lid more convenient.
7. DETACHABLE BASE: It has two ways to use it: with its own bottle to hold water, or with mineral water bottles inserted directly into it. Easy to carry, the design is more user-friendly. Fast charging: it can be charged in 3 hours via USB, mobile charger, mains power, etc. One charge can be used approximately 10 to 30 times.

Specifications:

Item Type: Hydrogen Water Bottle
Shell Material: Aircraft Aluminum, Anodized
Back Body Material: Food-Grade PC
Weight: Approx. 677 g / 23.9 oz
Battery (integrated): Lithium-ion battery, 2200 mAh, model: SW 1025 40 2P
Water quality for hydrogen production: Pure water, distilled water
Working time: 5-10 minutes
Electrolysis method: Proton film, platinum and titanium electrode
Power interface: 1A 5V USB Type-C cable
Product size: Approx. 198 x 63 mm / 7.8 x 2.5 inches
Hydrogen concentration: 8,000 ppb
Capacity: 208 ml
Water bottle mouth: inner diameter 30 mm / 1.2 inches
Use: The standalone bottle can be used with water, or with mineral water bottles inserted directly, in two ways.
How to use:
1. The first step before use is to unscrew the cap.
2. Unscrew the base.
3. Remove the double-handed rubber stopper.
4. Then assemble the water cups.
5. At this stage, we notice that the bottom of the cup body has an arrow. Align the base of the arrow with the other end after a reverse rotation to assemble the bottle, then the cap.
6. The bottle and the base of the grain should be considered tightly fitted.
7. As the strength of the gauze is small, solid gauzes can be replaced before use with a patterned gasket (Note: a thick gasket ensures a better seal, the concentration of auto-hydrogen will be higher).
8.Adding water should not be too full; eight full bottles are sufficient.
9. It is recommended to add cold, white water, tap water, or pure water that is 50° below the normal temperature.
10. Screw the cap onto the bottle after filling.
11. Click once to turn on the hydrogen for 5 minutes, click twice to produce hydrogen for 10 minutes.
12. If you need to pause or turn off the machine mid-cycle, simply press and hold to turn it off. Tip: Once hydrogen production is complete, you must press the top of the pressure relief valve on the bottle to unscrew the cap.
13. If there are stains in the water cup, clean it. Unscrew the cap and the cup. The cap can be cleaned with white vinegar or citric acid.
14. Note that the base is not washable.
15. If the cup is discharged, unplug the power cord, take a mobile phone charger from home and plug it in to charge. After charging, you will see the screen flashing, and so on. Once the flashing stops, it will be finished. !

Package List:

1 x Hydrogen Water Bottle
1 x USB Cable
1 x Instruction Manual
1 x Washer

Note:

1. The base of the cup is not washable. 2. Pure water is recommended; the water level should be filled to 80%. 3. It is best to drink it immediately. 4. Make sure to tighten the lid securely when making hydrogen. 5. Open the lid and press the release button first. 6. 7. Make sure to release the pressure the first time after producing hydrogen to prevent the internal pressure from remaining high for an extended period. It is normal for the pressure to gradually increase and the bubbles to decrease after hydrogen production. This is due to the increased pressure above; the bubbles rise with more difficulty, but the hydrogen produced continues to dissolve directly into the water. 8. Do not produce hydrogen water during charging. 9. Do not allow water to enter the machine, especially the base, which must not be wetted.