REF HYMMA120ME5031695

Hyundai HYMMA-120 120Amp MMA/ARC Inverter Welder, 230V Single Phase

In stock
In stock
£115.99
£115.99
total
£115.99
Secure Payment
Delivery options
Free delivery (postcode specific) *
Home
  • At home between 02/12/2021 and 06/12/2021 for any order placed before 6 pm - Free delivery (postcode specific) *
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Product details
Features
  • Type of welding
    Coated electrode - MMA
  • Warranty
    2 years
Description

Hyundai Inverter Welder: HYMMA-120 MMA / ARC Welder, 230V Single Phase, 120Amp

Weld up to 6mm steel

The HYMMA-120 is a lightweight and incredibly versatile single phase ARC / MMA welder from Hyundai. The HYMMA-120 is capable of welding mild steel up to 6mm.

Lightweight portable ARC Welder

Weighing only 6.0kg, the HYMMA-120 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMMA-120 extremely cost effective.

Adjustable ARC welder for multiple materials and thicknesses

The HYMMA-120 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-120 can be regulated within the range of 20-120 Ampere making the HYMMA-120 adjustable to suit welding different materials and thicknesses of steel.

High Duty Cycle Welder

Beware of lower quality models by always checking the ‘Duty Cycle'. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 120A welder has a duty cycle of 35% when used on 120A output. This means it can be used for three and a half minutes in every 10 minute period.

Duty cycles for the Hyundai welder range shown below:

ModelOutput Amperage / Duty Cycle / Period of use within 10 minute period
MMA12070A / 100% / 10minutes90A / 50% / 6minutes120A / 35% / 3.5minutes
MMA16095A / 100% / 10minutes120A / 50% / 6minutes160A / 35% / 3.5minutes
MMA200P155A / 100% / 10minutes200A / 60% / 6minutes
TIG200155A / 100% / 10minutes200A / 60% / 6minutes
Mig180105A / 100% / 10minutes140A / 60% / 6minutes180A / 35% / 3.5minutes

Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money.

Adavtages of an inverter welder

The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run.

Safe and Versatile

Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.

Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-120 is a good all rounder for welding with rods up to 3.2mm. The HYMMA-120 features high frequency starts allowing for smooth arc strikes.

With low service and maintenance requirements, the HYMMA-120 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.

In the box: Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush

Know your welder

(MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

(TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.

(MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

Covered by a Hyundai 2 year platinum warranty.

Specifications

ModelHYMMA-120 Inverter MMA / ARC Welder
Input Voltage (V)230
AC Frequency50
Max Input (kVA)4.8
Efficiency (%)83
Power Factor (Cosφ)0.7
No-Load Voltage (V)65
Rated Output Range (Amps)20 - 120
Duty Cycle (%) Under 40ºC35% @ 120A, 60% @ 90A, 100% @ 70A
Current @ 60% (A)90
Usable Electrode (mm)1.0 - 3.2
Dimensions (H x W x L) (mm)355 x 230 x 320
Net Weight (kg)6.0
Output Current (A)120
 
 
 
 
 
 
 
 
 
 
 
 

Do you need more information?

We're here to help!
You are here:
*Free shipping availability will depend on your postcode, this information will be available at checkout.

The biggest marketplace in Europe for DIY, Home & Garden

  • Millions of products

    Loads more than in a shop, and without needing to navigate all the aisles

  • Delivery to your home or click & collect

    Whichever suits you best

  • Hundreds of dedicated experts online

    Like Macgyver but online