Hyundai HYTIG-160 160Amp TIG/MMA/ARC Inverter Welder, 230V Single Phase

View description
£356.99
£356.99
total
£356.99
Secure Payment
  • Free delivery (postcode specific) *
Delivery method
  • At home between 29/07/2021 and 02/08/2021 for any order placed before 5 pm (Free shipping)
Product details
Features
  • Amperage range
    160 Ampere
  • productRef
    ME27400349
  • warranty
    2 years
  • manufacturerSKU
    HYTIG160
Description

Light, portable and reliable TIG welder

The HYTIG-160 is a lightweight and incredibly versatile single phase MMA / TIG welder from Hyundai.

Weighing 12kg, the HYTIG-160 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include TIG welding torch with 4m cable, electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYTIG-160 extremely cost effective.

The HYTIG-160 TIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYTIG-160 can be regulated within the range of 20-160 Ampere making the HYTIG-160 adjustable to suit welding different materials and thicknesses of steel.

Beware of lower quality models by always checking the ‘Duty Cycle'. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 160A welder has a duty cycle of 60% when used on 160A output (TIG).

Duty cycles for the Hyundai welder range shown below:

ModelOutput Amperage / Duty Cycle / Period of use within 10 minute period
MMA12070A / 100% / 10minutes90A / 50% / 6minutes120A / 35% / 3.5minutes
MMA16095A / 100% / 10minutes120A / 50% / 6minutes160A / 35% / 3.5minutes
MMA200P155A / 100% / 10minutes200A / 60% / 6minutes
TIG160124A / 100% / 10minutes160A / 60% / 6minutes
TIG200155A / 100% / 10minutes200A / 60% / 6minutes
MIG180105A / 100% / 10minutes140A / 60% / 6minutes180A / 35% / 3.5minutes

Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money.

TIG Welder with inverter technology and thermal overload protection

The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run.

Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.

Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYTIG-160 is a good all rounder for welding with rods up to 4mm. The HYTIG-160 features high frequency starts allowing for smooth arc strikes.

With low service and maintenance requirements, the HYTIG-160 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.

In the box: TIG welding torch with 4m cable, Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush.

Know your welder

(MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

(TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.

(MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

Covered by a Hyundai 2 year platinum warranty.

Specifications

ModelHYTIG-160
Rated Input Voltage1P AC 260V, 50Hz
Rated Input Power4.2KVA
Rated Input Current18.3A
Rated Output Current & Voltage160A/16.4V
Output Current20~160 (TIG) / 20~140 (MMA)
No Load Voltage70-5
Rated Duty Cycle 60%
Efficiency85%
Power Factor0.73 (cose)
Protection ClassIP21S
Insulation ClassF
Attenuation Time0-5S
Reblowing3S
*Free shipping availability will depend on your postcode, this information will be available at checkout.