Incubator Digital Temperature Controller LED -55-120 ℃ Thermostat 10a 1 relay DC12V

Features:

1. DC12V is available; you can choose any voltage according to your needs.
2. Microcomputer control, direct temperature display, convenient and quick to use.
3. The temperature control range is -55 to 120℃, and the temperature control accuracy is 0.1℃.
4. The power consumption of the entire machine is ≤40mA under quiescent current conditions and ≤65mA under inrush current conditions.
5. Made of high-quality plastic, it is designed with delayed start protection and will alarm when the temperature exceeds the temperature limit.

Specifications:

Item Type: Incubator Thermostat
Material: Plastic
Product Color: As shown in the pictures
Product Weight: Approx. 43 g / 1.5 oz
Temperature control range: -55-120 ℃
Control temperature accuracy: 0.1 ℃
Input voltage: DC12 V
Output: 10 A 1 relay
Data storage: Yes
Environmental requirements: -10 ℃--60 ℃, humidity 20%-85%
Power consumption of the entire machine: Quiescent current ≤ 40 mA; Inrush current: ≤65mA
Code Description:
Code
Description
Setting range
Factory setting
P0 Heating/Cooling H/C C
P1 Return difference 0.1-30 2.0
P2 Set maximum limit +120 120
P3 Set minimum limit -55 -55
P4 Temperature correction +10~-10 0
P5 Delay start 0 to 10 minutes 0
P6 High temperature alarm -55 ~ 120 OFF
P7 Data Caging ON-OFF OFF
P8 Restore factory settings ON-OFF OFF1. Temperature setting
Once the thermostat is turned on, the actual temperature will be displayed. Press the SET button once and the display will flash. Press the up and down buttons to adjust the temperature.
2. Press and hold the SET button for 5 seconds to enter system setting mode. Once the setting is complete, press ENT to confirm and return. During normal operation, press and hold ENT to stop.
3.
P0: Operating Mode
This value must be set when the thermostat is used for the first time. If used for heating, it is set to "H", and if used for cooling, it is set to "C".
P1: Hysteresis Setting
The return difference is the difference the temperature controller must operate again after reaching the set temperature and then shutting down. For example, if we set the heating mode and the temperature is 37 to 40 degrees, then the hysteresis is 3 degrees.
P2-P3:
Set the maximum temperature range
This function allows you to define the maximum temperature range and is not involved in setting the target temperature. The thermostat's adjustment range is -5 to 120 °C under normal conditions. If you don't want such a wide range, you can use this function to narrow the range to the defined value. If P2 is set to 50 and P3 to 20, then the thermostat's adjustment range can only be set between 20 and 50 °C.
P4:
Temperature correction
This function is used for temperature calibration. If there is a difference between the actual temperature and the setpoint temperature, you can use this function to calibrate. The corrected value = the measured value + the corrected value.For example, if we measure the temperature at 25.6 and the actual temperature is 25.8 degrees, we can set P4 to 0.2, so the displayed temperature is 25.6 + 0.2 = 25.8 degrees.
P5: Delayed Start
This function is generally used for compressor refrigeration. If you are buying this thermostat for a refrigerator or freezer, then this value must be set. Depending on the size of the back pressure generated by the compressor, the general setting value is 3 to 6 minutes. If it is not for controlling the compressor or if the delay function is not required, this value is set to "0".
P6: High Temperature Alarm
Set the high temperature alarm value. When the actual temperature exceeds this value, the display and buzzer will sound an alarm simultaneously. At the same time, the output is cut off to protect the circuit. The alarm is that the screen displays the prompts "H" "H" "H" and the buzzer sounds "tick", "tick", and "tick".
P7: Data Lock
If the set value needs to be protected to prevent others from changing it at will, you can enter P7 and set it to ON after adjusting the parameters. Once the setting is complete, the temperature and internal parameters can no longer be changed. Unless you enter P7 and turn it off.
P8: Restore factory settings
When the set value is abnormal or a malfunction occurs, you can enter P8 and turn it on to restore factory settings, or you can press the up and down arrow keys to turn it on and restore factory settings.

Package List:

1 x Motherboard

1 x Panel

1 x Sensor

2 x Screws

2 x Nuts

1 x Manual