Inductive Vehicle Loop Detector for Car Parking Barrier Loop Detectors/Vehicle Access Loop Sensor

Description 1. The pulse relay can be configured to activate vehicle detection or when the vehicle leaves the loop. 2. This feature determines the non-detection level at maximum sensitivity to avoid detecting vehicles such as large trucks. 3. The sensitivity can be adjusted using four sensitivity settings on the switch. 4. Four frequency configurations can be used to prevent signals from interfering with adjacent loops. 5. This relay is generally used to prevent false detection of small or fast-moving objects.

Specification:

When the detector is tuning, the green channel LED and the red power LED illuminate. They remain illuminated for approximately 2 seconds, then the green LED turns off. If there is a loop fault, the channel LED illuminates and flashes to indicate a fault. If the fault is self-healing, the detector will continue to operate.

The green channel LED also illuminates as soon as a vehicle is detected passing through the inductive loop. The red power LED on top of the unit will remain lit, indicating that the unit is powered on. Features: The pulse relay can be configured to activate vehicle detection or when the vehicle leaves the loop. This feature determines the level of non-detection at maximum sensitivity to avoid detecting vehicles such as large trucks. The sensitivity can be adjusted using four sensitivity settings on the switch. Four frequency configurations can be used to prevent signals from interfering with adjacent loops. This relay is typically used to prevent false detection of small or fast-moving objects. Specifications: Condition: Brand new Material: ABS Color: Black Response time: 10 ms Supply voltage: 220 V Power consumption: 4.5 VA Output relay: 240 V/ 5 A DC voltage tolerance: ±15% AC withstand voltage: +10%/-15% Operating temperature: -20°C to +65°C Storage temperature: -40°C to +85°C Frequency range: 20 kHz to 170 kHz Sensitivity: Adjustable in 4 increments Signal hold time: Unlimited cycle/limited to 10 minutes continuously Loop inductance: Total loop plus connecting line is 50 Ω to 1000 Ω (ideally 100 Ω to 300 Ω). Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter. Package List: 1 * Gate Opener 1 * Connection Terminal 1 * Instruction Manual Note: 1. The detector should be installed in a convenient, weatherproof position as close as possible to the loop. 2. The installation location should be chosen away from heat sources. 3. Other surrounding equipment should be at least 10mm away (it should not be securely fixed to the wall). 4. Proper loop configuration and detector installation will ensure a successful inductive loop detection system. 5. Several important loop parameters include: cycle diagram, size, turns, and installation method. 6. Please note that the new and old types of this product will be sent randomly, and please ensure this is acceptable before ordering.